Software
Houzz Logo Print
sarah_scoble

Fridge keeps tripping breaker

6 years ago

We bought our home back in November, we have been here for a total of 8 months. We have a Whirlpool Gold series model GSF26C5EXY00 it is almost 10 years old. The fridge has had 0 problems, it runs like a champ. Yesterday I cleaned out the fridge it was pretty packed with food and now it sif ificantly less empty ( I don't know if this info is in the least relevant but, the timing was right after I did this) few hours after cleaning fridge I open the door and the light was not on. At first I thought I burned the bulb by having it open during cleaning but then I noticed it was on at all, it flipped the breaker it is running on a gfci so I pressed the reset button and continued on. Now it's the next day and the fridge will flip the breaker after exactly 1 hour of running. We reset it and it turns on as normal but it is continuously in the hour mark. I am not gifted when it comes to knowing anything electrical. I need help knowing weather this would be a problem with the appliance or something electrical?? Please help me! Thank you in advance.

Comments (7)

  • 6 years ago

    Is it tripping the GFCI or the breaker in the breaker box?

    Is the refrigerator on a dedicated circuit (no other outlets on the circuit)?


  • 6 years ago

    Hi, To find out if the breaker /GFCI or refrigerator is bad run an extension cord from the fridge to a different circuit and see what happens.

    Good Luck Woodbutcher

  • 6 years ago

    FWIW, a refrigerator in the kitchen of a dwelling does not require a GFCI. I would remove the GFCI & see if the problem goes away.

    Another long time poster lost the entire contents of his freezer due to a GFCI outlet. He thought the freezer had failed; turned out that the GFCI had tripped. The freezer was located in a garage (where GFCI are required), to explain why the failure went un-noticed.

  • 6 years ago

    If you have a freezer that's not where you pass it a few times a day, you should get a freezer temperature alarm. A breaker/GFCI trip is but one of the problems that can happen. We lost the contents of our freezer because something blocked the door from closing fully.

  • 6 years ago

    Thank you all who responded. We ended up taking an extension cord and plugging it into a different circuit and fridge began working normally after leaving it plugged in we again plugged it back where it was originally connected and it also began working normally. I am by no means an expert but I'm hoping that due to the hot day and me leaving the door open for an extended period of time it was just working extra hard to keep temp down and maybe the gfci couldn't "handle it" and kept popping the breaker. We are going to have someone look at the circuit because I think it was not done correctly when put in. Thanks again to all who took the time to respond!

  • 6 years ago

    Motors (including compressor motors) are inductive loads that can trip GFCI breakers when they come on, because of the nature of the way they power up. Sounds like a non-GFCI outlet/circuit needs to be used.


    On a separate note, I've seen an older fridge crap out when it was shut off for cleaning because the compressor was running hot and about to fail. It was running constantly and probably the only thing that kept the bearings from seizing up was the fact that it was running constantly. We shut it off to empty it and vacuum behind it and de-dust the coils underneath, and noticed the compressor was very hot. After the work was done it would not come back on. I still think this is a breaker problem with the OP's unit but the failure to come back on after a shutdown reminded me of a similar event with mine.