Are you sure it's actually leaking while it's in use?

Have you ever paused the machine to add something and the water on the door dripped on the ledge of the opening and dripped down the front.

Mine has done that.

Grab a chair and actually watch a cycle and see if it happens while it's running without opening up the door.

Make sure the rubber seal is clean by going over it with a damp cloth, to make sure you're getting a good seal. Also wipe down the glass door that makes contact with the seal.

If it is leaking you probably just need to replace the boot (the rubber seal around the opening where the door that makes a seal).

You can do it if you're a do it your-selfer or have a repair man do it.

This is the last generation washer but it should be similar on your model.

Thanks for the info, very helpful!