Software
Houzz Logo Print
webuser_892162742

Ceiling Sag. Simple Fix Or Nightmare Scenario?

6 years ago

Just finished kitchen remodel (of course), and noticed some dimples on the ceiling where nail/screw heads are. While the ceiling does not seem to be “pillowing” like pics I’ve seen, I can see a faint dark line where every ceiling truss is located (24” OC).

My suspicions is that nails were used, which seems silly as far as holding power for a drywall ceiling, but especially since the house was built in 1982. Also, the fasteners are not the recommended 12” apart, more like 16”+.
Scary part is that I can push on the sheet rock between the trusses and watch the nail dimples move in and out, meaning that the drywall is not making solid contact with the truss. Yikes!

So, can this be corrected simply by adding screws by the old fasteners and in between? The very mild “pillowing” effect is very unnoticeable, to the point that if I run my hand across the ceiling, I can’t feel any “hills and valleys” so to speak.

Hoping for a simple solution as this is a split level with unfinished basement, so the problem area is above the entire living area. Would be a real nightmare to replace/add a layer as far as everyday life goes.
Built in ‘82
Blown insulation in attic above

Thanks!

Comments (3)