Software
Houzz Logo Print
drsaj

Dining Room Drapery Suggestions Needed

6 years ago

Hi all. Some of you may remember from a year ago that I was looking for a dining room chandelier and many of you thought this was the ONE. So I decided to splurge on this beauty. It's the perfect scale for the room, plus it gives an adequate amount of light. Now I would like to add some stationary drapery panels to the windows. I have one sample I'm considering, but wondering if I should get something a little more sheer and subtle. Also wondering what kind of rods to use. Thoughts or suggestions? tia

Comments (15)

  • 6 years ago

    More photos

  • 6 years ago

    Btw, walls still need to be painted. We're considering BM Natural Cream or similar.

  • 6 years ago

    BM Natural Cream

  • 6 years ago

    Here is the pattern of the one fabric I like on a larger scale, but in a different color. It might be too busy, but I just don't know.

  • PRO
    6 years ago

    I think you need to paint the walls the background color from the drapes so keep that in mind. As for the drapes IMO skimpy drapery panels that can’t close look tacky drapes should always be wide enough to close even if you never close them those stupid little 1/ 2 rods on either side are exctly that

    drsaj thanked Patricia Colwell Consulting
  • 6 years ago

    I love the drapery fabric and it's a good choice for your furnishings.

    drsaj thanked zthar
  • PRO
    6 years ago

    I think the fabric is nice. As for rods I would do a single slim rod with a corner elbow bracket and do two single width panels and one width and a half for the corner of Euro Pronged pleated drapes. One single panel on the outside of each window and one width and a half that bends the corner. all hung on rings. I am guessing on the corner part as your photos aren't clear enough to make out how much room you have between each window.

    drsaj thanked Design Interior South
  • 6 years ago

    Design Interior South, there is 17" between the windows. Are you suggesting 3 panels? Like in this photo? My rods would need to be curved as my walls are curved there. Do you have a photo you can post that depicts your suggestion?

  • 6 years ago

    ...or is that 4 panels?

  • 6 years ago

    How about this idea to avoid the expense of curved rods?

  • 6 years ago
    last modified: 6 years ago

    Please help! Because of the curvature of the wall above the windows, I have to get a custom rod made. I need advice on measurements for rod and panels, please!!!

    I'm working on this with a welder and a drapery lady. My idea is for a single 1.25" black rod with the ends mounted to the wall like in the attached photo. There will be a center support. The welder will put a set screw at one end for the rings to go on.

    I want the windows to be as exposed as possible so my idea is to have the panels just frame the windows/shutters to soften the windows/room without looking too wimpy. I won't need to close the panels because the shutters work just fine for what we need.

    The drapery lady is suggesting 3 panels, which I agree with, but then she's also suggesting that the panels on the left and right match the width of the center panel. I understand that symmetry is important, but in order to accomplish that, we'd need to mount the rod a whopping 14" to the outside of the windows and the panels would go into the windows by 6" which is too much for what I want to achieve.

    The windows are 52 and 53 inches wide and there is 17 inches between them.

    I'm thinking to have the end of the single rod mounted at 11.5" to the outside end of each window. There will be a center support. I only want the panels to go into the windows about 3 inches on each side to maximize the window openings. The end panels would have a slightly smaller width than the center panel. Another option is I could have 4 panels made and slightly split the 2 center panels.

    Questions:

    Will my idea of measurements work or will the drapery panels look too wimpy?

    Should I do 3 panels or 4?

    How wide should each panel be to achieve the best look in keeping the maximum opening of the windows?

    How far above the window openings should the rod be mounted? (I'm thinking 8 inches. The ceiling is about 15 feet high.)

    Should the rings be 1.5" or 2" diameter?

    Thank you!


  • 6 years ago

    Bumping... I'd really appreciate input. @Design Interior South, I hope you'll weigh in again. Thank you.

  • 6 years ago

    Why do you think you need drapery panels? the room is lovely just as it is. Clean, monochromatic but not boring. Don't clutter it up with draperies.

  • 6 years ago

    lindac92, you're the second person to have that opinion. I think drapes would both soften the windows and bring a bit of darker color to that part of the room. The black rods would help tie in the chandelier. I want panels that wouldn't be too thick or heavy looking. Maybe I should post a separate poll on the question of drapes or no drapes.