Software
Houzz Logo Print
luckyjill

Anyone have experience with Snapstone?

13 years ago
It is a floating porcelain tile system.
Anyone ever use it? Seen it in a room?

Comments (16)

  • 13 years ago
    Anyone?
  • 13 years ago
    I plan to use it in a room that will be insulated -- but no heat or AC.
    Therefore standard tile or other options are inappropriate.

    Hoping someone on here had used it before? ;) It is kind of new.
  • 13 years ago
    i've heard of it, but never used it, or seen it down. sorry.
  • 13 years ago
    I've seen it at menards and lowes.
  • 13 years ago
    Anyone else?

    (Thanks for the reviews, it won't let me read them though as I don't subscribe)
  • PRO
    13 years ago
    You don't have to subscribe, just read thru the bottom of the page. They are there.
  • 13 years ago
    You are right. I found it . Thanks Ron! If you happen to see my post about how to finish or skirt the bottom of my raised sunroom/deck, I would love more suggestions.. I am afraid it is going to end up looking very cheap or 'out of place'.

    So far so good with the tile. Goes in very easily. Not too hard to cut. The math is a little tricky as you have to take into consideration once the tiles are snapped in place that is a 1/4 inch difference --that adds up..

    Grouting today.
  • 11 years ago

    @luckyjill, I can't see in your photo how you handled the edges at the room's perimeter. I have a similar sunroom I'd like to use this tile for. Are you still happy with the tile? And did you grout the perimeter of the room, or use something else to fill the expansion gap? Thanks!

  • 7 years ago

    @luckyjill, I'd love to hear how the tile held up. We need a low profile option for our kitchen and I just can't live with either laminate flooring or the raised floor that traditional tile would create. Are you still happy with the Snapstone? It looks beautiful in the picture you posted!

  • 7 years ago

    Hi! It’s been six years now and it still looks great , no problems!
    I would say if you were looking for a ‘low-profile’ option, this would not be for you as this is just as thick as standard porcelain tile. The snap mechanism underneath makes it thicker .

  • 7 years ago

    Around the edges of the room is a caulk that matches the ‘grout’

  • 7 years ago

    Thank you for the update! It's not necessarily the tile thickness that's a problem--our contractor would need to add cement board to our subfloor (and possibly an extra layer of plywood). He says that in all, the finished floor could be 3/4"-1" above the wood flooring in the rest of the house! I'm trying to find ways to avoid that much of a raise. Again, thank you for your response. I'm so glad you love your floors! <3

  • last year

    We installed snapstone in our kitchen... approximately 4 years ago. Although it still looks nice...and was fairly easy to install. If I had a chance to do the whole project over...I would not go with that product again! Here is why...Because of the interlocking trays the tile sits in...there is a bit of "flexing" going on as you walk on the floor...which is fine except for the fact that because of this flexing...the grout tends to break and pop out of the grooves between the tiles...so regrouting has become an every two to three month chore ( at $70 per bucket..maintaining this floor is a costly problem)

    Also..the tiles are VERY brittle and can break easily... (Be sure to buy lots of extra tile just for repairs)..anything dropped on the floor usually results in a busted tile! (A drinking glass...glass survived..two tiles did not. A butter knife...fell handle first..took out a tile. A 1lb package of frozen hamburger slid out of the fridge and destroyed two tiles...etc, etc, etc)

  • last year

    I 100 percent agree with Richard’s comment above. We have had this for quite a while and all the same experience with the tiles. Cracked tiles and loose grout. Boo.

Sponsored
Peabody Landscape Group
Average rating: 3.5 out of 5 stars8 Reviews
Franklin County's Reliable Landscape Design & Contracting