Software
Houzz Logo Print
webuser_113197894

Is this idea not viable? Marble dinning table.

6 years ago
last modified: 6 years ago

I had an idea that I'd create a dinning table with marble 6 - 7 feet by 3 feet on metal legs like this https://www.etsy.com/listing/265794323/metal-table-legs-u-set-of-2?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=metal+table+legs&ref=sr_gallery-1-20&frs=1 .

I'm not experienced with this at all and today while reading about marble countertops just learned that marble can't support much overhang normally. So would a marble top have enough support with just two square legs? Am I not thinking this right?


Is there any other material that'd work with this idea? Quartz? Quartzite?

Comments (6)

  • 6 years ago
    last modified: 6 years ago

    Marble would require a full supporting frame underneath it to prevent breakage.

    HU-113197894 thanked formulaross20
  • PRO
    6 years ago

    I agree with the other posters. Marble is considered a "soft stone". It's not soft of course but it doesn't have the rigidity of granite. Providing a substrate below the marble should work. Although I'm sure you would want a solid piece of marble you might consider marble tiles for the tabletop which would be lighter and easier to support.

    HU-113197894 thanked Norwood Architects
  • 6 years ago
    last modified: 6 years ago

    First research whether you would like to use a hard, cold stone top as a dining surface.

    YMMV, but I would not be a fan of the sharp noises that glasses or dinnerware will make, the risk of their chipping, or the bone-chilling effect stone has on any resting elbows or forearms.

    HU-113197894 thanked THOR, Son of ODIN
  • PRO
    6 years ago
    last modified: 6 years ago

    Think about cost. Marble runs up to $100.00 a sq foot. 3 x 7 = 21 sq ft..

    What are your chances of finding a 21 sq ft piece just lying around the yard? Then the edges have to be polished, delivered to your home, and installed upon whatever.

    Let’s say you don’t find a 3 x 7 piece (more likely) so you have to buy a slab. $$$$, you have 3 x 7 cut, etc..leaving $100’s of dollars in waste.

    All done! Now, get ready for all the stains from coffee rings, salad dressing, wine, spaghetti sauce you will find on your new dining table top.

    Have I convinced you not to do it?

    How about you buy the metal legs you love and top it with lacquered white solid wood?



    HU-113197894 thanked JudyG Designs
  • 6 years ago

    From my own experience: We bought a used 3x5 carrara marble dining table for $100 when the owners updated their kitchen counter to Van Gogh granite, and it no longer matched. The table top was well-used, but I don't know how long they had owned it. We converted it to a 34" tall island/worktable, by adding 'feet' and a low platform. The top is supported all around by a wood apron tied into the wood leg/post on each corner. We also added two 1x4 undercounter supports, running across the 3' width, and a cabinet on the working side.

    My kids prefer eating at the island, since it is in the middle of the kitchen.

    If you like the look of the square metal legs, it seems that you could have a metal fabricating shop (or a friend with a welder) add flat metal bars to create a support frame, which would act as the apron on my island does. For the 7' length you might need the same type of crosspiece(s), or maybe a third bar running the length of the top, or a third square leg.

    HU-113197894 thanked mama goose_gw zn6OH