Software
Houzz Logo Print
webuser_424918790

Recognize this cabinet style?

5 years ago

I’ve been searching high and low for the cabinet maker and door style featured in this Silestone ad. Anyone know what it is or have a close match in mind?


Comments (31)

  • PRO
    5 years ago
    last modified: 5 years ago

    Try Conestoga wood specialties. Be warned that is a real GOO catcher : ) of five piece/raised panel applied molding ..probably

    http://cabinetauthority.com/catalog_access.php

    Golden thanked JAN MOYER
  • 5 years ago

    The more detail like that, the more gunk builds up. Personally, I'm always looking for easy cleaning and maintenance. If you have a housekeeper, go for it!

    Golden thanked decoenthusiaste
  • PRO
    5 years ago

    All I see is a ton of places to catch everything and IMO no house cleaner will be thrilled either with more time to clean the kitchen and of course on your buck.

    Golden thanked Patricia Colwell Consulting
  • PRO
    5 years ago

    Your inspiration photo shows frameless (European style) cabinets and full overlay, raised-panel doors with bolection mouldings.

    Golden thanked Charles Ross Homes
  • 5 years ago

    Interesting design ... seems to be for the person who couldn't decide if they wanted a recessed panel or a raised panel!

  • 5 years ago

    You guys are so right about the “gunk-factor”! Thank you for that perpspective!

  • 5 years ago

    @chispa as a perpetually indecisive person, I feel attacked! Lol! But yes, the hint of a raised panel is what I like about it. I get the glam that comes with all of the detail, but the low, sharp profile in the middle gives it a modern edge.

  • 5 years ago

    I wanted something very similar two years ago when we remodeled our kitchen. Recessed panel with three layers of detailing. The upgrade cost was very significant so we went with a simpler design. It was a custom job by Wood-Mode.

    Golden thanked pennfire
  • PRO
    5 years ago
    last modified: 5 years ago

    @Golden

    What is "modern" about it is the rich paint color. The hardware. The choice of solid surface perhaps. There is not ONE thing modern about the cabinetry style. : ) Dust away my dear, dust away................

    You aren't "seeing" what you think you are seeing.

    If you told me someone re purposed and painted twenty year old cabinetry? I'd not have fainted to the floor.

  • PRO
    5 years ago

    That looks like a 1" thick door. The raised molding detail is very deep despite the partial raised panel. That may give you a place to start.

    Golden thanked Debbi Washburn
  • 5 years ago
    last modified: 5 years ago

    @JAN MOYER I agree that there isn’t much out there that’s actually ‘new’. Even the flat slab, clean look we call ‘modern’ today. I don’t need a lesson in design history. I studied it in college and have worked in various design industries for 20 years. I appreciate you providing the info I asked for as well as the tip about function. I know what I’m seeing is not true modern. I said the ultra-low raised panel in the middle gives a ‘modern edge’. I’m not building a modern home. I’m an artist and like blurring the lines.

  • PRO
    5 years ago
    last modified: 5 years ago

    Everything is modern in its day. What makes that, or anything else "feel" modern , or current, or simply updated, is interpretation via the eye of the beholder. Which to me in this instance is largely its jewel toned rich color and hardware etc. Everyone sees differently, but as an artist, you already knew that : )

    In dark and grainy oak......? A whole different thing and maybe doesn't get a second glance.

  • PRO
    5 years ago

    I wish these contests would offer better prizes.

  • 5 years ago

    Haha @Mark Bischak, Architect! No one wins when it comes to banter with strangers on the internet, so I’m done over there! I just wanted to know where to find the door style!

  • PRO
    5 years ago

    @ Mark

    Dinnertime in the sixties and any discourse off the rails?

    Dad: "whoever wins get the coliie" ........

    We never did get a collie.

  • PRO
    5 years ago

    Growing up, my neighbor had a collie. Their dinners must have been different from ours.

  • PRO
    5 years ago
    last modified: 5 years ago

    Or they were better behaved.................I still don't have a collie. Hell, I don't even have a lowly goldfish. My sister told me I make her cat nervous - I "move too fast". I guess that explains just about everything.

  • 5 years ago

    3 collies when we were growing up. One could ring the door bell.

  • 5 years ago

    Hey, I had a collie growing up! Loved that dog, best friend a young girl could ask for.

  • PRO
    5 years ago
    last modified: 5 years ago

    No collies. But, I can tell you that the applied molding doors in the door displays were always chewed up, because they projected out further and banged into the adjacent doors. I dn’t think that style is suited to such tight clearances with frameless cabinets. Or full overlay.

    And this is where our Insta 5 minute vignette hay on the walls culture fails us big time. It sets up an expectation of a fleeting moment in time that it will be the forever look, without any problems. It’s all about the visuals, and not the 10 year mark of living with it that long. 10 years with that will have chunks of those moldings missing and missing paint.

    Golden thanked User
  • PRO
    5 years ago

    @JAN MOYER Thanks for the link. Used a few of those mitered doors 2002-2007, all custom, full overlay in the higher end but not all. Getting tired of shaker & nearly shaker and doing lots of flush slab rift white oak presently.


    This is very cool!

    Golden thanked Jeffrey R. Grenz, General Contractor
  • 5 years ago

    If you love the design find a local custom cabinet maker and have them do your cabinets.


    My doors were a collaboration with my designer and the cost was not more expensive than if I had bought from a manufacturer and probably less considering all of the custom functions and aesthetics I did. The company also did my office as well as what I call my stripper television room divider - the television is mounted on a pole so that it can be turned for viewing in either the living room area or the office/den area :-).

    Golden thanked Helen
  • 5 years ago

    ...now I need a stripper room divider... ;)

  • PRO
    5 years ago
    last modified: 5 years ago

    Thank you Cooks World! I left that out. You are so right. The bottom cabinetry will not survive mop and broom for a single year : ) Unless of course............your Swiffer or broom never seeks the area back to the toe kick.Matters not where the lower pull is : )

  • 5 years ago

    How in the hell will a broom or mop even come close to hitting the raised portion of the cabinet doors or drawers?

  • PRO
    5 years ago
    last modified: 5 years ago

    Never cleaned Sammy?? I'll show you my LOWER nicked doors and drawers with the APPLIED protruding molding. Trust me, I am neurotic and careful. I just don't love beating up my KNEES.

  • 5 years ago
    last modified: 5 years ago

    I am confused as to why OP's cabinets would be in danger of being damaged when cleaning by ordinary means. My cleaning lady does the kitchen and while she is not a bull in a china shop, I don't think she is taking extraordinary precautions when she sweeps, mops or vacuums.


    Maybe I am missing the issue but my kitchen cabinets have been installed for 2.5 years and they are still pristine.



    Golden thanked Helen
  • PRO
    5 years ago

    Look again at the bottom cabinets and protruding molding on the inspiration pic.

    Yours has no more projection than a shaker door or drawer face.

  • 5 years ago

    I don't want to belabor it but I still don't understand why normal cleaning will damage the cabinet posted. How is one cleaning with a broom such that it is hitting the door? Typically when I am sweeping or vacuuming or mopping by the toe kick the handle is far down and just the very bottom is near the actual cabinet and it is gliding well below the door.


    How is one hitting the molding?


    I understand if people don't want to dust ridges but that is different than a style being easily damaged while cleaning.