Software
Houzz Logo Print
webuser_152579871

Vessel sink questions

5 years ago
last modified: 5 years ago

Hello, I’m aware most people aren’t fans of vessel sinks, in order to keep our existing cabinet vanities we may need to use vessel instead of under mount since our designer designed one of them to put the sink on the left instead of centered in the vanity. Medicine cabinet is centered, I think I’d prefer it centered.

1) Can I keep the standard height faucet I already own even if it isn’t designed for a vessel?

leading to

2) can I ”drop” the vessel deeper into the counter so I can keep the existing faucet? Vessel I’m considering is 5” deep, I’d like to make the opening large enough to drop the vessel enough to make it only 4” from the counter. So drain will be a little low.

Faucet


Sink vessel I’m considering


Comments (13)

  • PRO
    5 years ago

    That is a small sink.

  • 5 years ago

    Can you show us the vanity plan? There may be other options you haven't considered.

  • 5 years ago

    Yeah, not a fan, but I think we all understand that sometimes an item "just fits" -- even if it's not your favorite choice.

    No, a standard faucet will not be tall enough. Not nearly. Consider this picture -- nothing like your faucet, but chosen at random as an example. Look where the turn-on valve is located -- it's just above the edge of the sink, so it'd be easy to reach. With your handles, you'd have to reach around the base of the vessel, which would not be convenient.


    No, you can't drop the vessel lower ... but perhaps you could choose a more shallow vessel sink. Probably not. Even if you did, you'd still have super-short handles that just don't go with a vessel sink.

    The reality is that if you go with a vessel sink, you need a faucet that's designed for a vessel sink.

  • 5 years ago

    They just splash everywhere, and are so dated. I’d replace the vanity. Sorry.

  • 5 years ago

    You will want to get a new faucet that has a spout height and reach that works with the vessel sink you choose. It's not neccesarily a dated look, and I have no splashing problems with mine.

  • 5 years ago

    You have to also be aware that vanities for vessel sinks are quite a bit shorter than those intended for undermount sinks -- you may end up feeling that it's way too high, even if you have a shallow one!

  • 5 years ago
    last modified: 5 years ago

    I agree with @acm. A vessel sink was not my first choice, but I wanted to keep my existing older vanity which is only 31" tall. An undermount sink at that height is not particularly comfortable to use (ETA it would be too low).

  • 5 years ago
    last modified: 5 years ago

    Well here is an early drawing of the vanity. It is floating and a shiny black lacquer finish.

    The issue is that 2 bases are now 33” and they fill the entire wall from the shower on the left to the toilet room on the right.. But the sink is still set to be on the left instead of centered. The only way we see to center the sink (under the 48” mirror) is a vessel. I’d welcome further ideas Jennifer K.


    We can lower the counter a bit so the vessel isn’t too high to use. We HAVE stepped away from the stone vessel, have ordered one with tempered glass. We love the faucet and don’t intend to change it; can put the faucet handles spread apart so they can be seen and accessed easily.

    Also looking into a vessel that’s much shallower so it can work with the faucet.

  • 5 years ago

    What you are looking for is called a “semi-recessed” sink. Go to any big website (except Houzz, that does not have them!) like Build.com or QualityBath.com and look under sink types for semi-recessed bathroom sinks. You can get ones that sit a little above the counter or that even come out in front of the counter. You will find one that works with your faucet. Whether it will work with your vanity, you will need to discover.

  • 5 years ago

    Btw, you do not need to center a sink under the mirror if you make it wall-to-wall mirror above your vanity.

    Shmoo thanked Nancy in Mich
  • 5 years ago

    If you have a floating vanity, why not just remount it higher and use the kind of sink that you'd prefer? Or remount it lower so that the vessel sink will work properly?

  • 5 years ago
    last modified: 5 years ago

    No need to center the sink. You’re causing unneeded pain and suffering here. The whole point of having an offset sink vanity is to gain that extra counter space.