cabinet hardware help

5 years ago

I’m trying to do all pulls but What do I do for different size cabinet doors—do different heights get different sizes? That’s what I’m going with but don’t wanna measure wrong or order wrong size...I’m trying to use the ⅓ rule...also what do u think I should put, a pull or knob in the corner by the 3 stack drawers? It’s kind of like an accordion door..also, if I do put a knob there, it will be the only one...so put two more above the fridge? Or just stick to all pulls of various sizes that match?

Sort by:Oldest

Comments (7)

PRO
Mark Bischak, Architect
5 years ago
Is there a problem with going with all pulls all the same size?
Brittany Feus
Original Author
5 years ago
No I just didn’t know what was normal to do
Related Professionals
Rutland Interior Designers & Decorators · Florence Architects & Building Designers · San Antonio Architects & Building Designers · Lafayette Kitchen & Bathroom Designers · Webster Kitchen & Bathroom Designers · Lewiston Kitchen & Bathroom Designers · Brooklyn Kitchen & Bathroom Designers · Montgomery Kitchen Remodelers · California Kitchen Remodelers · Tulsa Kitchen Remodelers · Portland Kitchen Remodelers · Farmington Kitchen Remodelers · Wilmington Architects & Building Designers · Kalamazoo Architects & Building Designers · Ashland Home Builders
User
5 years ago
Agree with mark
WestCoast Hopeful
5 years ago
Our pulls are the same size even though door sizes vary
artemis_ma
5 years ago
Mine are all the same size, as well.
K R
5 years ago
I have larger ones on my drawers and smaller ones on my top cabs. The bigger ones (which are necessary for my large drawers) just didn’t look right to me on the top. Each kitchen is different, get some samples and try them before you drill the holes.
acm
5 years ago
Another vote for all the same size, unless you have something extremely small, like one of those pesky 6" or 9" drawers. Also, no knobs at hip height or you'll be tearing pockets and/or pulling out your headphones all the time!