Software
Houzz Logo Print
kvmcnew

Quote for flooring...is it good?

5 years ago
last modified: 5 years ago

Replacing appx 800 sq ft with lvp ( armstrong luxe rigid core) and was quoted $8760. This would including ripping out all the old floors, adding an underlayment, and installing the new lvp, including moving all furniture. We're in South Central PA. I have no sense if this is a good price or not. It's a very specific floor and there are only a handful of places that carry it in our area, so our options are limited. This company has in-house installers and has a lifetime warrenty on installation (for life of us owning it). The other companies use subs for installation.

Comments (7)

  • 5 years ago
    last modified: 5 years ago

    We're building a tract home and installing Armstrong Empower rigid core (specifically Scandia Oak Midsummer Sun) throughout our home excluding laundry and baths: 1800 square feet for $12,730. This is the builders price so taken that into consideration.

  • 5 years ago

    I am also in Pa and got a similar quote. (roughly $10 sf all in- which included, ripping up tile and carpet, paying LVP, finishing molding, moving and replacing furniture).

    I ended up getting 4 estimates. I wasn't planning to do that, but after I got the first one, others came recommended. Interestingly, 2 said they would remove the tile and 2 said they would install over. I expected if they were not going to remove tile that with less labor it would be cheaper.

    All 4 estimates were within $200 of each other.

    650 sf for $6400.

    I am using local store. Even when the price of material varied (though not by much) amazingly the installed price was hitting the same target.

  • 5 years ago

    Thanks all! We are getting another quote, but I really liked this company, so would prefer to go with them.

  • 5 years ago

    @kaitie09 I agree about wanting to work with a company that employs their own installers. That's how I feel about painters and it's my criteria for selection, as well. Unfortunately, there isn't a lot of information about their rigid core line, at least not on Houzz, and I haven't found much on the open net either. I'm taking a leap of faith that it being a high-end line of Armstrong that it will fit our needs and expectations. The price is 25% of our design costs. Good luck!

  • 5 years ago

    In Canada (read: HYPER EXPENSIVE markets) we expect to see $10/sf LABOUR costs for all of this work. The materials (plywood = $3/sf....yes....plywood is now MORE expensive than your flooring...just sayin') are ADDED to that cost. That means $3/sf for the vinyl...plus the $10/sf for labour and $3/sf for the plywood.


    Whew. It turns out your VINYL is the CHEAPEST part of your bill. In PA, I'm not sure how expensive labour is (micro economies exist where labour = $6/sf in a demoralized/depressed area), but the $8760 is at the low end for a Canadian housing market. Your area may not be so expensive.


    It's a good way to show you the UPPER ceiling...just so you understand what you are looking at.

    Get the other quotes. Just be aware of the contract you sign. If the cost is TOO LOW and the company *didn't pay attention to RISING wood/lumber costs then you may find they 'down tools' to prevent themselves from losing money on the job. Scary but it is happening more and more these days.

  • 5 years ago
    last modified: 5 years ago

    Jen K thank you. I was lucky to get some samples of the rigid core line first (you can order samples on the armstrong website) and we tried our best to mess it up. It only got a scratch and a few tiny gouges after we took very sharp wire cutters to it and beat the floor :) Even after that, you can't see the scratch unless it hits the light just right. We also linked a few pieces together and let water sit on it overnight, it did great. We have a large dog and wear shoes in the house, so we're not nice to our floors. I'm less concerned about the product itself and more concerned about the installers.

  • PRO
    5 years ago

    In-house installers is best. I wouldn’t waste any more time on bids. But get a couple of referrals and call them to make sure. With in house installers, the company cares about their reputation. Good luck. As stated, floor prep is key to good end result.