Software
Houzz Logo Print
kas4_nc

cabinet door won't close

5 years ago





The door on the left won't stay closed all the way. I can push it closed with no resistance but it rests as shown in the photo. The door can be opened all the way but it won't stay in the fully open position; it naturally comes to rest at less than 90 degrees as shown in the photo.


Can this be fixed by adjusting the hinges? If so, how?

Comments (14)

  • 5 years ago
    last modified: 5 years ago

    adjust the tension on the soft close element

  • PRO
    5 years ago

    Try adjusting the bottom hinge out just a poo.

  • 5 years ago
    last modified: 5 years ago

    Is the issue the hinge? From the photo, it looks more like the items on the tray, plus the cloth holder is hitting the steel wool pad holder on the door. Or even the tray itself. Try removing some of the items on the tray, or the entire tray, and definitely remove the scouring pad holder on the door (really, you can get a little scouring pad holder or tray for that and put it anywhere), and see what happens.

  • 5 years ago

    @dcarendt No change. I even removed the soft closer completely and the door is resting in the same position when closed.


    @Joseph Corlett, LLC I can't figure out how to adjust the door in/out. I can go up/down using the 2 screws on the frame or I can go left/right using the large screw in the center.

  • 5 years ago

    @Miranda33 Thanks for the suggestions. The door isn't hitting the tray. I removed the tray and got the same result. The door-mounted wire basket isn't hitting anything inside the cabinet, and the pull-out towel holder isn't hitting the door.

  • PRO
    5 years ago

    It's a PIA, but the hinge plate holes can be filled and re-drilled outward in order to move the door.

    kas4 thanked Joseph Corlett, LLC
  • 5 years ago

    Could the door be warped?

  • 5 years ago

    Thanks @Joseph Corlett, LLC. I was hoping for an easier solution. I'll have to decide if it bugs me enough to move the holes.

  • 5 years ago

    Is the door slightly warped? That is, does the bottom part of it contact the frame first and prevent the top from appearing closed ? If not, you could always put in a magnetic catch to help keep it closed. Alternatively, you could install new hinges and see if it improves things: they're inexpensive, and maybe you have some damage or wear with the existing ones.

    kas4 thanked kudzu9
  • PRO
    5 years ago

    Replace the hinges with two hinges from another door and see if it does the same thing.

    kas4 thanked BobH
  • 5 years ago

    Before removing & replacing the hinges, I would loosen the screws just a bit on the hinge plate that is attached to the frame and see if that helps. Might be that the frame side is just a bit out of alignment with the door side--torqued a tad, IOW's.

  • 5 years ago

    jdesign is spot on. I just had to do the same on my cabinets this weekend.

  • 4 years ago

    Update: one of the hinges was broken. I didn't notice until another cabinet door started acting the same way. I replaced the broken hinge and it works like new.