I am closing in on our final kitchen remodel decisions. Right now I am trying to confirm my hardware. I'll hold it up and decide for sure once the cabinets are in but right now I am thinking the following -

Cabinet hardware will be matte black. Cabinet uppers will be white. Cabinet lowers and island will be bm providence blue.

We will have all drawers on the lowers except the sink cabinet and trashcan pullout. I am thinking drawers 36 inches will have an 8 inch pull. The rest are just under 30 inches (I think 28.5 but I need to confirm). I was going to use a 6 inch pull on these. Trashcan pullout is 14 inches and the small width down low. Should I go with a 6 inch here too?

Uppers will all be 6 inch pulls.

For the sink cabinet and the three small drawers on the hutch style cabinet (24 inches wide) I was considering changing it up with glass knobs just for something extra and different. The sink cabinets will be the only cabinet on the lower portion, and the drawers will be the only drawers on the upper portion so I was thinking this might work. Would love thoughts on this idea. If not I'd probably do the six inch pulls here too.