I have some small exterior repair jobs to do. These are all interrelated which is why this post is so long.
Can anyone point me to some articles or give me advice on how to fix these problems?
(These jobs are not big enough for a knowledgable builder. I can’t even get a roofer to come out - still working on that.)
Background: The house is in a warm humid climate in the woods. The bottom floor is raised up with Piers footings and the crawl space is encapsulated. There is a brick skirt around the crawl space. No concrete slab or basement. Rain under the house does not seem to be an issue, especially now that the crawl space is encapsulated.
(1) GUTTERS: See gutter pic. I would like to replace the small sections of gutter on the house over the deck. There is a bay window area which creates odd angles. Current gutters are small and plastic. They are leaking in the corners over the deck, which causes water to pool toward the house. I would like to upgrade to larger rust-resistant gutters that will will withstand the weight of an extension ladder against them. I had those in a previous home - they were galvalume with metal braces. This job is not big enough for a gutter company as it is the only area of the house that needs gutters. (Houses around here generally don’t have gutters because tree debris always clogs them up, the houses are off the ground, there are lots of eaves, and the soil absorbs water quickly.)
- Where can I buy sturdy gutter pieces and supplies?
- How do I build and seal the odd angles of the gutter?
- I’m not sure if there is flashing(?) How do I deal with that?
(2) SIDING OVER DECK: See siding pic. The siding has rotted, and the rot may be almost all the way through to the house. It has reached through to the interior subfloor under the door (left side of pic). The door threshold is loose. I will be replacing the door and threshold, but I need to fix the stuff underneath the door and above the deck. I need to fix the bottom row or two of siding and everything behind it that has rotted.
An inspector suggested cement siding for the bottom row to prevent future water damage, so I bought some hardi trim for the bottom row over the deck. I have not installed it yet.
- What materials make up an exterior wall?
- Which of these materials should I demo and replace?
- Where do you buy wood siding like I have in the pic?
- Can you point me to any articles that would tell me how to build this out?
(3) SUBFLOOR SECTION: A small piece of interior subfloor has rotted inside the house by the back door. The installer who encapsulated the crawl space told me to replace a full 4x8 section of the subfloor. (There was a language barrier so I may have misunderstood something.) Part of that area is under walls. I assume subfloor goes under studs, but I am not sure.
- Do I really need to pull out a large section of subfloor, or can I just cut out the bad part and replace it, as long as I have joists or install blocking to support it?
- Do I need to seal seams or do anything else? (I will be installing hardiebacker and 6x36” porcelain plank tiles over the subfloor)
(4) FRONT DOOR: I want to install a new, smaller front door. The current front door is 36” wide, with 12” sidelights on each side, opening inward. I will replace it with a 36” wide door opening outward. (It’s needed because we have very little space inside and there is a covered porch outside.) I would need to frame in the remaining 24”, then create more exterior wall to cover that 24” that was used by sidelights. I might move the porch light over too. Since I need to learn how to make an exterior wall anyway (see #2 above), I thought I could tackle this myself, or maybe with a door installer but they tend to not do framing.
- Any tips on adding framing to the door to make the area smaller?
- Any other tips on creating the exterior wall section?
(5) WINDOW TRIM: See gutter pic. An example of rotted window trim is above the gutters. The trim is white. Multiple windows need trim replaced, usually on the bottom. I assume I need to dig the old trim out, clean somehow, and put new trim in with some kind of sealant or caulk. Is there more to it?
- Where can I find more info on how to replace window trim properly?
- What trim material should I buy?
These are all small jobs even though the post is long. I’m not confident I can find someone who will come out here and do it all properly, and I would love to know how to do it myself and save the $ to pay a roofer. Please post any tips below. Thanks!
Gutter and window pic:
Siding and back door pic:
Just FYI: The decking is 2x6 planks which have held up extraordinally well. Only the one in the pic is a candidate for replacement. The deck is ugly but solid. I will be pressure-washing, staining and sealing it after everything is repaired.
Also, the roof does not leak - It is just due for replacement or needs preventative repairs. I prefer to replace, but I need to get these repairs done before the roof is replaced. I need to do these repairs to proceed with floor tile and kitchen remodel which are happening soon.
K B
raee_gw zone 5b-6a Ohio
Related Professionals
Modesto Home Remodeling · Edmonton General Contractors · Myrtle Beach Bathroom Remodelers · Terre Haute Architects & Building Designers · Beaumont Architects & Building Designers · Somerset Design-Build Firms · Ardmore Design-Build Firms · Wausau Design-Build Firms · Sacramento Design-Build Firms · Clarksville Home Builders · Fort Worth Home Builders · Grand Rapids Home Builders · Lawrence Furniture & Accessories · Washington Custom Closet Designers · Salinas Custom Closet Designerskelli_gaOriginal Author