Software
Houzz Logo Print
caterwallin

What to do about boards?

4 years ago

We have several buildings in bad shape. One of them I mentioned is this old chicken house that we use for storage. The roof is in pretty good shape, and the boards as a whole aren't too bad except need painted, which I can afford a few gallons of paint. What I'm not sure how to go about doing is repairing the back side of the building, which has rotting boards. They're not in bad shape about halfway down, but the rest of the way (I'd say about the bottom 3 or 4 feet) they are really rotten and need to be replaced. Can a person somehow cut off the boards partway down, keeping the top parts, removing the rotten bottom parts of the building, and then replacing the parts of the boards that have been removed? The only equipment we have here are a drill and a jigsaw. Neither of us trust ourselves to run a circular saw, and I don't know if there's another type of tool that a person could buy to cut the rotten areas of the building off of the building and leaving the good areas. Even if this were possible to do, these boards are pretty old and from back in the days before a one by four, one by six, etc. actually became smaller boards, not being as thick or wide as what they originally were. So assuming that I could keep part of the boards on the building, how would it all match up if the boards nowadays wouldn't line up with the boards of days gone by? At least this building isn't bottoming out like our corn crib is, so I'm not worried about the "foundation" but thought maybe I could tackle trying to replace boards or parts of the boards.

Comments (2)