Software
Houzz Logo Print
webuser_899561186

Penny tile install

4 years ago
last modified: 4 years ago



Hi there, my tile guy has come and dry laid the penny tile pattern i want, i am concerned as i can see a grid pattern forming. How can this be prevented?


Comments (7)

  • 4 years ago

    it's not the worst penny tile install I've seen. I'm guessing once mortar gets involved it might get worse though.


    To fix the grid like pattern the installer needs to stagger the sheets.


    Honestly, I'd get a different tile. I can't believe how many "professionals" can't lay penny tile correctly.

  • 4 years ago

    Houzz has lots of posts about the difficulty in laying penny tile, as they often result in grid marks like you have. I think the only remedy is to get a tiler who is experienced in penny tile installation. Installing larger tile is much easier.

  • 4 years ago

    Stagger the sheets, pulls some tiles off the sheets and hand place them, etc. is the way to do that. Of course not everyone has the skillset required and not everyone wants to pay the much higher labor price for individual penny tiles to be handset.

  • 4 years ago

    I think it looks good and once grouted I doubt you will notice, provided your using a white grout.

  • 4 years ago
    last modified: 4 years ago

    I’ve seen way way worse. Match the grout yo the tile and send it. Or pay triple labor for someone with higher skills.

  • PRO
    4 years ago

    I did one job installing penny tiles for a customer, never again LOL.

    1st of all you need an experienced installer (took me a while to find one who did penny tile installs) and this guy that's all he was doing and known for is inlays, mosaic tiles, etc.

    It took him a while to tile that floor but it came out as each tile was installed separately and watching him I was saying to myself I'm glad I'm not paying for this.

    He was working on a small area at the time, he would lay a sheet on the thinset step back, and look go back adjusting pieces and it was back and forth for the rest of the floor (it seemed like this will never end).

    I don't remember him staggering the joints but there were no visible seams after he was done because he was adjusting pieces if something was off and after he was done it looked like a laminated surface. Also, I remember it took him a long time to grout, I met him in the morning was around 7 am and came back after lunch around 2 he was still up there... I was joking asking him if he took a nap, but I'll tell you that floor looked like one solid surface.

    That said it's a long process and hope your installer has the experience installing that tile...now it's a dry layout, when he starts to set sheets is when experience kicks in because sheets never lay right when set in thinset and the trick is adjusting individual pieces as you go to avoid lines.

    Good luck


  • 4 years ago

    Hmmm 🤔 The sheets of penny tile that I have seen have interlocking edges that fit together like pieces of a puzzle, so there shouldn’t be straight edges together.