Software
Houzz Logo Print
webuser_48605341

NEED SOME ADVICE ON COUNTERTOP ISSUE

4 years ago

Having quartz countertop installed soon. It’s not gonna be cheap of course. But installer came to measure and stated my wall is un even. He stated they will cut as close as they can to the wall. Imo that will look ugly. Other guy said they could* cut into Sheetrock and make it look* a bit more even. What should I do?

Comments (9)

  • PRO
    4 years ago

    Easy fix, have them cut the end of the counter crooked on purpose ( to fit your opening). Then top with a 4' high piece ( or whatever height pleases you cosmetically ) out of the scraps of the same countertop material. That way your fabricator will only have to polish the 1 face and top edge, along with 1 short end..... This is quite common with most granite and marble countertop installations today.

    Good luck & enjoy the new kitchen !

  • 4 years ago

    I agree with 3 Peaks Renovations. Most walls are uneven. My renovated kitchen was done with a 4 “ backsplash made out of my Silestone quartz countertops. The same was done for my bathrooms.

  • 4 years ago

    And now you know how these 'back splashes' came into being. Walls are often not straight. I am thinking we are dealing with a lot of inexperienced craftsmen these days...

  • 4 years ago

    And if you go with a 4” or taller piece of countertop for backsplash, no tile above it as it looks weird. You could carry the countertop all the way up to the cabinets as backsplash.

  • 4 years ago

    Wow, isn’t quartz fabricated like granite? If so, there should be no need for the 4” backsplash. Anyway, it’s also fine to cut into sheetrock.

  • PRO
    4 years ago

    That first picture is an incorrect use of a framing square. You place a 4' straightedge (level) along the rear wall, then place the framing square against the straightedge to find out if an adjacent wall is perpendicular or not.


    Carving out drywall is hillbilly. Tops are scribed to fit to out-of-square and curved walls. No splash should be necessary to cover a gap on a properly scribed top.

  • 4 years ago
    last modified: 4 years ago

    who is fabricating the countertop? this is why they do a template. they should cut the slab so that it fits your walls perfectly. no walls are plumb or straight.

    is someone doing this either with balsa wood or a computer laser level?



    with something like this, the quartz should be cut a bit better to get closer to the wall. this end of the cut would be deeper

    depending on how wide it is, the gap can be covered w/tile or the backsplash piece


    I don't know who is holding the framing square, but as joseph has mentioned, it's wrong.

  • 4 years ago

    Go with the guy who said he'd cut it to follow the wall. It works!

  • 4 years ago

    I had my countertop templated with the computer/ laser templating. My countertop came out flush to my walls. I chose the 4” backsplash out of Silestone quartz countertop, as i wanted a simple backspladh and do not care for backsplashs with tile and grouting.

Sponsored
AIS Renovations
Average rating: 4.5 out of 5 stars15 Reviews
Custom Craftsmanship & Construction Solutions in Franklin County, Ohio