Software
Houzz Logo Print
michelle_linden1

Larger Subway Tile-Getting mixed info on offset

4 years ago

We have decided to use larger (4") plain white subway tile for our kitchen backsplash. (We prefer a "true" 4 inch as opposed to the majority that are 4.25 inch.) We were leaning towards 4 x12 until I noticed on the specs that it was recommended to use a max 33% offset. I really wanted 50%. I talked to our installer and she poo-pooed the recommendation and said the company (Daltile) was just"covering their a**es." She said they do it all the time. So I drove to Omaha and visited The Tile Shop and another tile store. They both said the same thing... That they do it all the time!
I then visited Emser tile in Omaha. They have a
4 x 10. So I asked their guy if a 50% offset could be used for the 4 x 10. He looked up the specs and could only come up with a vague industry suggestion of using 33% offset if tile length exceeded 18 inches. ???
Help!!! I have no experience with tile and all the "experts" I consult give conflicting info.
If I do go 33%, I read here that you can do it in a way that doesn't have the "step" effect. Is there a name for this way of doing it? Does anyone have pics? I appreciate your help. Attached are pics of our kitchen setup. The tile would end under vent hood and floating shelf.

Comments (17)

  • 4 years ago



  • 4 years ago



  • 4 years ago
    last modified: 4 years ago

    Is it too late to do a 42" hood?

    Personally, I hate 33% offset, so I would talk to my tile setter and discuss the quality of the tile (how square and level) and ask if he/she can make it work at 50%, which might require agreeing to wider grout lines to offset any tile irregularities and potential for lippage.

  • 4 years ago

    Before you buy the 4x12, I would buy some card stock and cut out a bunch of "tiles" to see if you really like that longer tile in your space. I've made some crazy mock-ups over the years, but it really helps to SEE something.

  • 4 years ago

    Yes, we already have the 36" hood and cabinets installed.  I fought with hubby, builder, appliance store guy and even GE.Cafe.  All said the 36" hood was fine for 36" cooktop.  This hood is the one recommended by GE for our chosen cooktop.  I told them that I had read it needed to be bigger.  No one listened to me.

    Chispa... How wide of grout lines are you thinking?  That is my next question with our tile person.

  • 4 years ago
    last modified: 4 years ago

    As wide as it needs to be to make the installation work and look good. I've used hand made tile by Encore and Pratt & Larson before, and those are irregular tiles that require wider grout lines. I always left it up to my tile person to tell me what it should be and show me first by laying several tiles out on the floor to see the spacing. If I liked it we proceeded, if not, we discussed other options.

  • PRO
    4 years ago
    last modified: 4 years ago

    It depends entirely on the skill of the tiler, the leveling system that is used, and the size of the grout lines. You can not choose a 50/50 with tiny grout lines with that size subway and not expect lippage. Do 1/8", not 1/16", with a Raimondi wedge leveling system, and an experienced tiler, and it should be fine. No $500 guys. The $1500 guys.

  • 4 years ago
    last modified: 4 years ago

    Take your tile, lay it flat, and see how off it is. Then you'll know.

    If you want really flat in a larger tile, use stone. Unlike ceramics(including porcelain), it's cut after it's "cooked" so it's actually FLAT. There are some really white marble tiles. (I'm messy enough to put something else behind the cooktop though.)

  • 4 years ago

    The 33% overlap is more important on floors to prevent lippage from bowing that occurs in long skinny tiles the further away they get from a 1:2 rectangle.

    If you don't mind a more textured, less flat appearance on the wall, do 50%. But with undercabinet lighting unevenness drives some people crazy.

  • 4 years ago

    I have 3 X 12 HD Daltile, 50% offset with minimal grout. No detectable lippage in all lighting conditions, but my tiler was excellent and culled tiles that weren't flat.

  • 4 years ago

    Your hood is fine. Deep fry in the middle. :)

  • PRO
    4 years ago

    So, most important question is how did you select your tile installer? Sounds like you are not comfortable with her ability to advise you so maybe look at whether you hired wisely? She's the one you should be talking with at this point. Also, do not expect perfection with imperfect material. She should be able to advise based on the selection and application (with actual hands on the tile) . Ask her to show you the patterns possible with the tile selection. We pay attention to manufacturer specifictions and industry standards and advise based on our expereince. If you're worried the installer isn't capable then start over.

  • 4 years ago

    Unfortunately, we live in a small Iowa town.  There are basically 2 tile companies in town and ours is most recommended.  I am not worried so much about their tiling ability.  I am more concerned about their willingness to veer away from the manufacturer's specs

  • PRO
    4 years ago

    I use 36" hoods with 36" ranges often and as long as the CFM is right no big deal. IMO that size of tile looks best stacked and unless it is rectified the reason for 33% offset is to avoid lippage . So check the tile and see if it is rectified and if not the choice is on you if there is lippage .BTW most tile setters worth anything will not guaratee install agianst the rccomnedations of the tile maker so on you like I said.

  • PRO
    4 years ago

    BTW, the Color Wheel Linear tiles are 4 1/4" and are designed as part of the overall modular sized system of the entire Color Wheel line. You can place one of the standard Color Wheel 4 1/4" "4x4's" in with the 4x12 as an accent, and it will fit perfectly.



  • 4 years ago

    Theresa21 has the right idea: cull warped tiles, and there will be some. I used 4x12s and laid some out on a flat surface. Most, but not all, were flat.

  • 4 years ago

    Fifty percent/long tiles looks as shown in the first photo (ignoring the tile over the range) looks better than 50%/short tiles as shown in the second photo and much better than 33% -- note "step effect" over the range -- shown in the third photo.

    -- amateur

    Arlington S Pershing Ct Kitchen · More Info


    Elmwood Two · More Info


    Modern Farmhouse with a Storied Past · More Info