Software
Houzz Logo Print
empireranch

countertop edge confusion

4 years ago

The fabricator dropped off a sample - what type of edge is this? I have 2cm Cambria slab. Thank you!

Comments (22)

  • PRO
    4 years ago
    last modified: 4 years ago

    That is straight ease and polish. It is what you want, unless you are QUITE traditional.

    What is the cabinet construction,, and why the plywood top? Build up?

  • PRO
    4 years ago

    Eased edge

  • 4 years ago

    Eased. What do you not like? You don’t want a 90 degree. It will chip

  • 4 years ago

    Jan: maybe plywood because they’re using 2 cm slabs, not 3 cm? (Just my guess)

  • PRO
    4 years ago

    Eased the perfect edge .

  • 4 years ago

    Does anyone know if the pic above is any of these profiles? These are from Cambria’s website. The one that says eased as a description is beveled where the pic above looks more rounded. Trying to decide which one to do. Definitely want to avoid chipping! Thanks!

  • 4 years ago

    Grateful for the identification! I too was confused by the edge descriptions on cambria site. Have included picture of the cabinet door. To be honest, have no clue on the plywood… but have also include picture of the window as I would like the counter going straight without a step up under the frame. On a side note, the microwave looks huge but it’s the one I wanted LOL. Have included before pictures of kitchen. 1500 sq ft tract home in So. Cal.

  • PRO
    4 years ago
    last modified: 4 years ago

    Honestly, you HAVE the edge you "want", and you are agonizing on nothing. I can't even count all the kitchens I have the same edge in every material imaginable including quartz. I WOULD SUGGEST NOTHING other and especially for 2 cm.

    If you don't want it , you should want it. What I don't understand is all the plywood........never use it, but then I never use 2 cm. either

  • PRO
    4 years ago

    There's usually a plywood substrate under the counters. If you're going for a particularly thick edge reveal, like 3+", they will add another layer of plywood to achieve that look.

  • 4 years ago

    The Sample edge is called Eased or 1/8 Round. The side is straight and the bottom is flat. You could have the side Eased/1/8 Round like in 2nd photo.

  • PRO
    4 years ago

    ". Definitely want to avoid chipping!"


    The more rounded the edge, the less risk of chipping. This from the guy who gets the call to fix it and not the person that tells you what's in style.


    No pencil edges please and absolutely not at sinks.

  • PRO
    4 years ago

    "Left coast" may be different. NO body does it ( ply substrate) here, Sabrina, unless perhaps a build up for a waterfall..

  • 4 years ago

    Most of the slabs available in So. CA stone yards are 2 cm, so there is always plywood for a built up edge. Maybe easier/cheaper to ship lighter weight slabs to the west coast.

    In FL most of the slabs are 3 cm.

  • 4 years ago

    Yeah, all 3cm in Charleston. Never see plywood under

  • PRO
    4 years ago

    Maybe? Never saw it done any other way @Jan. In fact, the fabricators out here will refuse to template unless plywood is down.

  • PRO
    4 years ago

    Seriously?? We laser ( every place in town ) template to zero issue, and see the template right there on site, Tripods, sophisticated laptop tech... almost never ever a speck off, - great seams too. . Yikes!! Have to say I'm a tad shocked! : ) Apologies for veer.

  • PRO
    4 years ago

    I’m in Savannah and 3cm is the only thing available…

  • PRO
    4 years ago

    Full plywood underlayment is a waste of material and labor. Perimeter cabinet grade plywood is plenty and more desirable. Your tops will lie more flat when you don't use roof sheathing under your tops.

  • PRO
    4 years ago

    Don’t shoot the messenger, peeps. I don’t make the rules. 😂

  • 4 years ago

    @Joseph Corlett, LLC Which one of these edges (if any) is what is shown in OP’s pic? They all look so similar.


  • 4 years ago

    CA can be very unique! One place you still have showers waterproofed with "hot mop" tar, which I had never seen anywhere else, but works very well.

    https://www.bobvila.com/articles/hot-mopping/

  • PRO
    4 years ago

    LL:


    It looks most like the Ridgeline to me. Maybe a bit bigger radius.