I’m not sure if it’s possible to no stall after. But if it is, I’d have done the push mechanism… and no hardware.

However, if it’s too late for that, I’d probably go with one of the following.
I think gold looks beautiful with the cabinets.
I’d probably even go with an antiquey finish gold.
I’d either mix metals. Or if that scares you (it really shouldn’t … :)
You can change the faucet out to match too…

https://www.cb2.com/kela-brushed-brass-handle-12/s293129

https://www.myknobs.com/pdp/siro-hardware-2446-handle/siro-hardware-2446-70zn79/siro-designs-edge-pull-in-antique-brass

https://www.myknobs.com/pdp/toptk970bsn/toptk972hb-1/top-knobs-crestview-5-centers-finger-pull-in-honey-bronze

https://www.perigold.com/kitchen/pdp/rch-supply-company-19375-center-to-center-finger-pull-multipack-rhsu1749.html

These all come in nickel finish as well. If you choose to go that route

I love these also.

https://www.wayfair.com/home-improvement/pdp/p3013-vbz-hickory-hardware-studio-3-center-to-center-cupbin-pull-ymf1904.html

Thanks ! These are great ideas. Would you recommend going with all the same size or larger for upper cabinets and smaller with drawers and bottom cabinets?

It depends on which one you end up going with.
If you choose the finger pulls… the straight plain types… I’d do the same size for both

If you choose a regular pull I’d also probably go with the same size. But you’d probably want to test it out. Sometimes you can go a bit smaller on the drawer…

white laminate...as in pure white formica????? you have extremely nice cabinets///that counter is one of the most basic ...almost a downgrade I hate to say. I'm not sure you really mean white formica. but dont do anything but basic nickel or stainless hardware ...it will look odd to have custom hardware on those cabs w white formica.

Belwith Hickory 160mm Metropolis Satin Nickel Cabinet Pull P3222-SN Hardware · More Info