Software
Houzz Logo Print
jjjjade

Sealing products NOT really work

3 years ago

I've discovered a lot of cut-corner or job incomplet places from the the new house my husband and I bought. Just the kitchen island alone:


1. the countertop isn't glued or attached to the cabnet/island at all (When I hand wash dishes, my belly can push the countertop back and forth.

2. the top edge of the sink isn't sealed at allwitht eh countertop, so water seeps down inside the cabinet/island through the gap between the counter top and the sink.

3.garbage disposal at the top is't sealed at all with any sealant or plumber's putty.


Thus, just only my husband and I, there is no way we could lift the countertop up and glue it to the cabinet. Even if we could, we probably couldn't precisely align them together. We can forget about #1.


About #2, I used plumber's putty jamming the putty into the crevice between the top of sink and the countertop all around. How the sink setup is, there is always a lot of water splashing and collected at the top edge of the sink, so the plumber' putty somehow dissolved through time. I also used the pool silicone sealant to seal it, after taking all the plumber's putty residue. The silicone doesn't seem to hold up either on stainless steel. It can be peeled off.


What can we use to fix #2 problem? Thanks


#3 is easier, we can disassemble the disposal at the top and put putty there.


However, any suggestions for any the above mentioned 3 problems, please post here. Thanks

Comments (6)