Software
Houzz Logo Print
grace_zec

Thoughts on the right edge pull projection?

3 years ago

Hi everyone, I'm working on my kitchen (excuse the in-progress photos) and need to find the appropriate hardware for the cabinets and drawers, which was a lot harder than I thought!

I wanted to try to get edge pulls, ideally for both the drawers and the cabinets. For the cabinets, the pulls would be installed vertically along the side, so I'd need a very thin material since the cabinet doors are so close together.


I'm having trouble determining the correct dimensions for the pulls, especially in terms of projection and what .should be thinking about when it comes to center-to-center dimensions. If my cabinets and drawers are 5/8 inches thick, what should be the correct projection? Also, any recommendations on where to look for vertical pulls for cabinets?


I'm considering these pulls for the drawers: https://www.rejuvenation.com/products/barrington-edge-pull/?cm_src=WsiPipRvi&recstrat=RVI%7CRVI


Any input is much appreciated!


Comments (22)

  • 3 years ago

    No photos showed up. Try posting them as a comment

  • 3 years ago



  • PRO
    3 years ago
    last modified: 3 years ago

    I need more info since you already have pulls on the cabinets so what do you plan for filling the holes if you remove those pulls . I really do not know wta you are asking. I need to see your whole kitchen. IMO from what I see those pulls are not what would be my choice . Are painting the cabinets since right now they look pretty basic so to add a n expensice fancy pull makes no sense.Please post the pics of the whole space here in a comment DO NOT start anoter post

  • 3 years ago
    last modified: 3 years ago

    Thank you! I'm going for a monochrome, minimalist look in the kitchen. The drawer fronts and the silver handles are going away (this is an in-progress picture). All cabinet and drawer fronts will be plastered with a slightly darker shade of green than the wall. I would like to have hidden edge pulls on the drawers and the cabinet fronts to be consistent with the minimalist look, similar to the Rejuvenation pull I posted, but I'm not sure if the projection and dimensions will work for these cabinets which are 5/8 inch thick.


    Additionally, in case you're wondering, I will be adding floating shelves which are being plastered in the green plaster. Does that clarify at all?


  • 3 years ago

    The cabinets and drawer fronts are made out of wood, if that helps!

  • PRO
    3 years ago

    Waht do you mean plastered green. If they are wood are you not painting them ? I agree mortised will have to be the answer if you insiust on edge pulls . I think maye be we are javing alanguage meaning issue about what plastered is .

    Grace Zec thanked Patricia Colwell Consulting
  • 3 years ago

    It's a lime plaster that's troweled on after a primer. Does that impact the type of hardware that I can get? Let me know if you have any thoughts on the projection and other dimensions the edge pulls should have.

  • 3 years ago

    I don't think there is a correct answer to this because it's an unusual, non-standard door treatment and nobody knows. :)


    A mortised edge would probably work (you know, inset the pull into a carveout so it doesn't add any thickness). But that's not what you're asking is it? You want to know if you'll be able to get your fingers in there to open it?


    Probably best to order a few different styles and test them (without screwing in). Then you'll be able to decide if the projection is comfy for you.


    You'd better post photos when you're done--this is kind of cool!

  • PRO
    3 years ago

    Those needed an integrated Gola channel. With such tight reveals, there is not a lot of room for edge pulls. Your installer needs to see about adjusting the doors, to see if enough room can be created.

    Grace Zec thanked Yonder Way Design
  • 3 years ago

    got it - by adjusting the doors, do you mean cutting them to make them smaller?

    if that's not an option, should I go with non edge pulls?

  • 3 years ago

    If you route (cut out) some of the wood you can fit edge pulls on a tight fitting door/drawer. Mine would not have fit if it wasn't routed as it would hit the countertop above.

    You need someone who knows what they are doing and has a steady hand, or you can ruin the door/drawer!


    Grace Zec thanked chispa
  • 3 years ago

    IKEA as a silimar pull and it attaches on the back side of the door. Many sizes and it's pretty thin. Billboa or something like that - may save you some cash and be an easier install if the Rejuvenation ones need to attach at the top.

    Grace Zec thanked just_janni
  • 3 years ago

    Grace, you adjust the doors via the hinges. No cutting inivolved!

    Grace Zec thanked darbuka
  • PRO
    3 years ago

    I think a plastered finish on a cabinet would be horrible so paint the cabinets whatever color and I guess plaster the walls. I like things in kitchens really easy to clean so rough plaster anywhere would not be my choice I do however have a stone wall in my kitchen but put the gas range and cabinets on casters to move about once a month tow keep the stone clean. So I guess it the finish on the plaster is a good one you could wash easily.

  • 3 years ago

    Great point, Patricia! The plaster has a wax finish top coat making it easy to clean. My main question was about the hardware, but the folks here have some really helpful input.

  • 3 years ago
    last modified: 3 years ago

    TIP-ON BLUMOTION | Blum

    TIP-ON BLUMOTION

    Mechanical opening with integrated soft-close

    TIP-ON BLUMOTION combines the best of both worlds ‒ a mechanical opening system which lets you touch the drawer front to open the drawer ‒ and a soft close. Even if the drawer is manually pushed or pulled, TIP-ON BLUMOTION works great the next time it's needed.

    TIP-ON | Blum

    TIP-ON for doors

    Cabinet doors without handles open with just a light touch when you use TIP-ON for doors. TIP-ON for doors was designed to work in face frame or frameless cabinets, and it also works in both overlay and inset applications.

    It is easy to install and adjust so your doors open perfectly every time.


    If you're sure about that finish, go without handles.

  • 3 years ago
    last modified: 3 years ago

    Plastering cabinets will turn out about as well as that sounds. That is totally unsuited to kitchen cabinet use.

  • PRO
    3 years ago
    last modified: 3 years ago

    I missed the plastering of the cabinets. That’s not going to work. At all. There will be adhesion issues. And protection issues. Wax is a terrible finish. Water readily damages it. You won’t even be able to scrub those with a wet rag.

    With those being a veneer, you likely cannot sand all of it off without damaging the veneer. Soaking it off will likely damage the veneer. You may have to replace all the doors and drawers.

  • PRO
    3 years ago

    You ste going to need to join Kitchen Cabinet Painting Experts to figure out how to fix the f up. New doors probably.

    https://www.facebook.com/groups/PaintingKitchenCabinetsforProfit/?ref=share_group_link

  • 3 years ago

    Got it! i currently have smooth lime plaster with a wax finish on the walls and it's totally wipable and easy to clean. Are you all saying that that same finish won't work on the cabinets because they're made out of wood?

  • 3 years ago

    Wooden cabinet doors will flex a tiny bit and the plaster might flake off when they do.