Software
Houzz Logo Print
fsalazar8187

chimney flashing ideas

2 years ago

Hello
I would like to change my step flashing and was considering having it done in black . I’m interested in other options if anyone happens to have any ! I included pics of the front so it may give better perspective of the overall style .

Comments (13)

  • PRO
    2 years ago

    I agree with millworkman. And while you're at it, I'd remove the bottom course of siding, reinstall the flashing behind it and reinstall the siding with more gap at the bottom.

  • 2 years ago

    A charming home. I love the black windows.

    I’ll help spend your money! Have you considered adding a simple portico over the door and a new wider brick sidewalk?


  • 2 years ago

    Flashing is one of the last things amateurs should mess with and certainly not for appearance sake. Forgetaboutit and move on to something you understand or is less critical to weatherproofing.

  • PRO
    2 years ago

    @klem1

    The OP's use of the phrase "and (I) was considering having it done in black" suggests that the work would be performed by someone other than the OP. I don't see that as the basis for chiding them about their alleged inability to do the task. I use the term "alleged" because we don't know what the OP's construction skills are.

  • PRO
    2 years ago
    last modified: 2 years ago

    Sorry chimney flashing is IMO a must thing and not a decor element at all. If the roof stays gray if the new roof black black for the flashing . Waht is that sample board for on the porch?IMO this house is crying for a porch and a nice new walkway

  • 2 years ago

    What op and some respondents don't realize is properly installed chimney flashing is set in mortar between brick as mason builds chimney. To replace flashing involves serious demolition on chimney that rarely matches when redone. The cutesy black flashing will look awful with mismatched mortar unless exceptional $$$ mason is hired. If you change siding when you want to change color of house I would understand if you changed flashing but that house doesn't look like where a multi-millionaire lives. So unless you want to flaunt your money do what normal folks do, PAINT IT.

  • PRO
    2 years ago

    The OP asked a question about replacing the flashing with black flashing. They didn't inquire about the technical details of what material to use nor how to install it. If they hire a competent professional mason, they don't need to know those details.

    It's difficult to judge from the photo alone, but it appears that the portion of the chimney above the roof needs maintenance. Replacing the flashing is a good opportunity to inspect the chimney and perform any required maintenance to maintain its function and longevity.

  • PRO
    2 years ago

    Tucking on the plumb and level mortar joints is definitely better suited for a mason, but they also will likely set up scaffolding to work on that pitch vs a roofer will likely just work off foam cushions. Is the roof being re-done?


    Cutting a small kerf in the brick and running straight sections of counter flashing is an accepted methodology as well and is better suited for your roofers to produce vs. a mason doing the more advanced flashing details.

  • 2 years ago

    " Tape off and spray paint with Rustoleum for metal. "


    @Carolyn G, lead flashing does not take paint.

  • PRO
  • 2 years ago

    As Lefty famously said "If you've got the money I've got the time". All this gum beating and wagging isn't getting the job done ,pull out your wallet and call out the troops.

  • PRO
    2 years ago

    Well, that's certainly helpful!