Software
Houzz Logo Print
andrew_sauter

utility sink securing

2 years ago

How to mount it?


Our contractor just added this accordion plumbing and we are using the feet. I realize this is probably not to code, but thought this as it is slightly adjustable.



https://overstock.bedbathandbeyond.com/Home-Garden/Trinity-Stainless-Steel-Single-basin-Utility-Sink/13148958/product.html?option=21790992

Comments (6)

  • 2 years ago

    Call a plumber, and from reading your other post, I would not want your contractor to be doing anything at my house.

  • 2 years ago
    last modified: 2 years ago

    It appears that you could eliminate the white, "accordion" tailpiece by cutting the white horizontal pipe shorter, allowing the j-pipe to shift to the right and substitution of a straight tailpiece.

    Dig this!

  • 2 years ago
    last modified: 2 years ago

    Agree the 'double accordion' should be eliminated at a minimum. thanks for the part cruise.

    I am going to try and get another bracket and have it mounted to the wall, then I want to enclose it with some more magnetic steel to protect the drywall and facilitate adjustable storage.

    Joseph, the 'agency problem' is a real! I suspect there is a wide range of build quality even in HCOL areas, especially when you have inexperienced clients.

  • 2 years ago

    Re: " I am going to try and get another bracket and have it mounted to the wall" - I bought a used restaurant sink for our garage utility sink, similar but larger, which already had a drilled hole in the center of the top metal angle of the unit, the same angled surface on the top of yours where the sink dies into the wall. I ripped a length of 2x with an angled bevel along its long edge, fastened it at the appropriate height to the wall and into studs, then secured the sink to the cleat with a wood screw and trim washer. Sorry for the picture of the dirty sink, I just finished tiling a bath and haven't scoured the sink yet!





  • 2 years ago
    last modified: 2 years ago

    I'm not really understanding what's going on here: Is this new construction, a remodel, what?

    The accordion drain pipe is totally hillbilly - all of it.

    It looks like the drywall was open - why didn't you put the supply and drain lines where they should have been in the first place? As it is, besides the bogus drain connection, your supply is also in the wrong spot and not accessible.

    I know it's a pain, but you really can't start shopping for finish fixtures AFTER the rough-in is done. You need to know what you are going to put there before you do rough-in and close up the wall. Although the drain is bogus, this isn't just the plumber's fault... it's whoever bought that sink after the rough-in was done.

    I've seen similar things done when a bathroom was plumbed for a vanity and the homeowner decided to have exposed plumbing. There was red and blue PEX sticking out - along with PVC drain - and none of it was lined up with anything.


    BTW: The answer to "How to Mount It" is shown in the video on in the link you provided. There is a bracket that that is hidden by the sink.