What brand did you use on the cabinets? Sometimes they also make appliance pulls.

I assumed that the cabinet pulls were square. The photos were taken from too far away to discern their shapes.

• Amerock BP54046FB | Matte Black Appliance Pull
• Top Knobs Top Knobs Square Appliance Pull, Black, Metal

When I was looking for kitchen pulls, I only looked at designs that included fridge (appliance) pulls. I found mine at Top Knobs. Huge selection.

But, the user of the kitchen needs to physically go hardware shopping. You can only determine the construction and comfort of the pull, by handling it in person.

Rejuvenation is another good source.

Note: My SZ pulls (SZ632 overlays) and on my overlay Miele DW, are mounted on pillars not at the ends of the pulls. So painting an SZ pull of this type black would not match. But it looks like there is also a series that has the pulls end mounted. Not exactly the same as in the images above. See comparison at: https://www.subzero-wolf.com/assistance/answers/sub-zero/common/sub-zero-standard-amp-accessory-handle-information.

I went down quite a rabbit hole looking for pulls. Most of the appliance pulls I found felt too skimpy / small in diameter for me (I wanted something around 1" wide or more.) I'm very happy with the ones I got from Emtek Select (link.) They come in a flat black finish, knurled or smooth, and several sizes. I have a whole spreadsheet of pulls I considered, many of which I ordered samples for. So in case it helps, below are links to some of the others that weren't skimpy and had a nice 'hand feel' (in my opinion):

• Park Lane by Classic Brass (these come in a large number of finishes; the sample was gorgeous and had a very solid feel but since I was getting dozens of matching cabinet and drawer pulls it was too spendy)
• Waterstreet Brass pull
• Gibraltar by RK International (this was my front runner, but one cabinet maker thought that at 3.7 pounds it could be too heavy for the fridge door panel)
• Contemporary by Baldwin
• Trinity by Emtek

Be sure to order samples, and check the return policy when doing so.

The hardware you used on the cabinets looks like it should be big enough.

If they need softer rounded edges yet still modernish, look at Hardware Resources Jefferey Alexander series: Model "Gibson" in matte Black, 12" appliance handle size. Price online is about $96 each but look for a local dealer. My price for this is more like $60 each plus tax.

• 12" Center-to-Center Matte Black Gibson Appliance Handle

#105-12MB

Build.com.

Put in all your specs and you will get hundreds of choices.