The screw holes won’t align. You need to ensure the track is level and square to the box

If you just want one, you remove the broken one and take it to the store and then it will be easier to find a good match.

thank you.

@HALLETT & Co. all i need to do is ensure the track is level and square to the box, correct. do i need it to be level and square with other track?

Yes but that track is presumably level and square already. Barring that it needs to mimic the other one.

thank you @HALLETT & Co. are there any tricks or tools to make the process of checking level and square easier?

I got the track plumb and level but when I tried to install the drawer on to the tracks, it is not going in.

are there any tricks to installing this drawer?

Not going in at all or is it binding as you push it back?

One of the wheels is not letting the drawer in. Other wheel is fine. I am worried if I push hard, it will damage the cabinet.

Do I need to use a specific maneuver to push it in?

The two wheels need to drop into the track from above, usually you have the back end of the drawer in the opening and the rest of the drawer angled down to allow them to drop in. Once the wheels drop into the track you lift the drawer up past horizontal as you start to push it in place. As soon as it starts to roll you can drop it down to horizontal

Glad it worked out