Software
Houzz Logo Print
webuser_767126879

kitchen cabinet depth too short for premade countertop with backsplash

last year
last modified: last year





I bought ready made countertop with backsplash for my kitchen cabinets but the overhang will be more than an inch.....will be actuall 2-3 inches. What is the best way to handle this.

Comments (11)

  • last year

    cut off the backsplash ridge ... skribe to fit the wall. and the front will work.

    you don't want that curb backsplash anyway... add a nice tile backsplash after installation.

    HU-767126879 thanked Lyn Nielson
  • last year

    Are you intending to put a drawer in the top drawer space? It looks like it will not clear the countertop overhang. Can you return this countertop and get a new one? It seems like a premade top is not great for your situation.


    What about Ikea butcher block tops cut to size? They are rather inexpensive.





    HU-767126879 thanked Kendrah
  • last year
    last modified: last year

    Unscrew the cabinets from the wall and pull them 2 inches forward. Use a 2" piece of wood as a spacer to screw the cabinets back into the wall. Make sure everything is level, then use the pre-made counters. Watch out for conflicts with your trim.

    HU-767126879 thanked chispa
  • last year

    Ty all.....it's a house built in 1951 and basically the cabinets were made in such away as not to be removeable unless I demolished and rebuilt them.. The drawer will clear and if needed I can build it up a bit. Just getting the house to this point has been a massive undertaking since my husband passed in August.....he was the guy who knew everything. I knew I would run into an issue trying to finish it up. I even thought of scribing the backsplash itself....to reduce the thickness. That might only take an inch off though. I would also have to add support to the cabinet fronts underneath the countertop for support. Think that would work?

  • last year

    Those look like site built cabinets, thus immovable. I agree with Kendra, get butcher block counters from the big box home improvement store, cut them to size, finish with a wipe or brush on urethane. It will look nice and be inexpensive. You may be able to use the piece you trim off as the backsplash ”curb”.

    HU-767126879 thanked John Liu
  • last year

    Floor and Decor also has wood countertop material. Link.

    Including European white oak. Link.

    HU-767126879 thanked dan1888
  • PRO
    last year

    Cut off the splash plus more. Buy the build up kit, so it will lift those up high enough to clear your drawers. Then do a separate tile splash.

    HU-767126879 thanked Minardi
  • last year

    Ty so much everyone.

  • last year

    Let us know what you end up doing.

    HU-767126879 thanked RedRyder
  • PRO
    last year

    Looks to me like those are site-built cabinets....not new. Can't pull those forward. I like the idea of cutting off the backsplash and tiling down to the countertop instead.

    HU-767126879 thanked The Kitchen Place
Sponsored
Mary Shipley Interiors
Average rating: 4.8 out of 5 stars34 Reviews
Columbus OH Premier Interior Designer 10x Best of Houzz