@HALLETT & Co. good point. Here are some we liked based on photos:

I don’t have a photo handy, but I used Emtek and have been completely happy with them. Great quality, not too pricey.

The last photo looks very much like Liberty Classic Bell that I put in my kitchen. Mine came from Home Depot… Is it critical to have a rounded inside. They aren’t rounded, but they don’t bother me…. Most important is to use varying sizes on drawers, depending on the width of the drawer. Never use 2 pulls on a wide drawer. I liked the look vs the similar one above because it is very classic/transitional with no backplates. If you get from a big box store like HD, buy packages of 10 (or whatever) of each size online to save $!

See this link for great advice on handle size and placement:

https://sandiegohardware.com/blogs/resources/the-ultimate-guide-for-cabinet-hardware-placement-and-sizing

Are these for new or existing cabinets? Much older cabinets, as from the 1980’s have different sizing between holes than new handles. If old, your options would be very limited to finding handles in a size that fits existing holes!

@chloe00s these are new cabinets

Having a rounded inside edge isn’t an absolute requirement but a strong preference - we find them much more comfortable to use.

Unfortunately we don’t care for the basic wire / staple style, which does tend to have a rounded back edge.

Also, does anyone have a recimmendation for a site to look at with a wide range of hardware? Our contractor referred us to Build.com which is decent but we are still having trouble finding just the right thing.

These are our pulls (in stainless). The photos look like they have a square inside edge, but it is nicely rounded.

Order just one, to see if you like it.

Drawer pulls

You could also look online for HD or Lowes for reasonably priced options.

Eleven years ago we bought Hickory Hardware Greenwich handles that I still like. Very comfortable for my arthritic fingers. Also comes in many sizes, and still look like new.

Two votes for Hickory Hardware Greenwich, so we will get a sample from that line. Thanks!

We are also considering the Elements Brenton line - a bit Art Deco which may work for our vaguely 20s kitchen (butter yellow Shaker cabs, soapstone, white subway, schoolhouse style milk glass pendant). Any thoughts on the Brenton?

https://www.build.com/elements-239-128/s1162764?uid=2779019&searchId=xpiHEswaaI