In my previous house I did a 24" SZ freezer column and 36" SZ fridge w/drawers. The pulls are 16" on the doors and 10" on the drawers.

Note that both units are hinged on the left which worked best for this kitchen.

Thanks for responding!

I think it will be fine. It's 1/3 of the drawer size. Less than that ratio would look wimpy, but 12" should be fine.

If you click Accessories on the SZ webpage of the refrigerator you're buying, you'll see the handle lengths sold by the company: 18" for one type and 21" for the other. You could use those lengths as recommendations.

A 12" pull is plenty on drawers.....I would still use 18" on Fridge. So you need a selection that offers both sizes: )

Thanks! This is exactly what I did! My main fridge is the 48” Classic French door with one big freezer drawer on bottom. Definitely did the 18” there. Thanks again for responding