HI there. I am remodeling this bathroom. I have removed an old carrara marble shower and I am replacing it with a new shower with two glass walls. I am also replacing the old jacuzzi tub and decking with a free standing tub. We found new wall tile that matches the existing floor perfectly and also sourced baseboard tile from the same supplier. However, the floor tile they sent is not the same shade as the wall and base tile. I always knew the new flooring would not match the existing perfectly so we planned on polishing and resealing both tthe old and new tile and resealing all of it.

The existing countertop is black granite so I have been thinking about doing the new flooring to match the black but I am not sure about the pattern.

original tub and shower

Countertop before walls and cabinets were painted coventry gray from Bejamin Moore

The old shower

Cuurent state showing existing floor, curb of new shower and location of tub. The tub will be a rectangular free standing soaking tub. The existing floor is 2 by 4. We were planning on matching the existing grout. The new shower tile is 6 by 12. You can see a little bit on the left part of the shower wall.

The new tub.

So what do I do about the floor tile to go under and around the tub. I will have about 8 inches clear on three sides around the base of the tub adn the adjacent shower wall will be glass.

You have all been so helpful before!!!!!