When you get to the paint, I would love to help. I do digital color consultations all of the time for a living and I love it! You email me the pic, I digitally paint it and email it back to you. Its that easy!

You can see some of my work here on houzz or on fb at ww.facebook.com/whatcolor.org Or you can check out my services at my site at www.WhatColor.org

I also have a FREE option so you can basically test it out my services and I will make you two pictures for free. Then if you want more, you have to pay $29.99 and you will get a set of 7 pictures...

I hope to hear back from you soon!
consultant@whatcolor.org
randall \o/

ps. attached are some examples of what I do...

If possible have the same finishes throughout.

Your bathtub rod should be the same as your other bath finishes in most cases I would think, unless accenting a shower curtain in some cases. In this general question, I would say it should be chrome like your faucets. You may want to rethink the oil rubbed bronze finish for door handles. I think you are going to find that this finish does not hold up to excessive use. Consider a satin or brushed nickel instead, IMHO.

The rod should be chrome, as everyone has said. Emtek makes a doorknob that let's you put different knobs on each side of the door, and I've used this method to solve problems like this. You could use chrome on the interior of the bath. By the way, Auntiebusybee is right about oil-rubbed bronze; the finish wears off. Not ideal especially in a moist environment. Good luck.

I just checked the dates and I've answered a 3 year old question. Need more coffee in the morning before doing this....