Software
Houzz Logo Print
pam_carpenter

OVER-THE-RANGE MICROWAVE DOOR CRACKED

13 years ago
The door on my white over-the-range microwave has broken (the third one in 10 years!) and I am thinking about having my husband make me a shelf to hold a regular countertop microwave instead of trying another over-the-range type. My appliances are white but my cabinets are oak-colored. Any ideas on how to make it look built-in?

Comments (19)

  • 13 years ago
    You will not have an exhaust fan if you change to a shelf and counter type microwave.
    Pam Carpenter thanked Debp
  • 13 years ago
    Do you plan on putting the shelf where the microwave is now? If so, I wouldn't put wood on top of the stove. The microwave now has an exhaust built into it for safety purposes. I don't know why your door keeps breaking unless someone is hanging from it. I have had 3 over the stove microwaves & none of the doors have ever broken.
    Pam Carpenter thanked lucyhomedecor
  • 13 years ago
    Glad to find that out. I'm considering getting one because my kitchen is so tiny. I'm finding it hard to figure out what kind to get because consumer reports doesn't rate noise and effectiveness of the fan, which is more important to me than operation of the microwave, which I just use to slightly defrost stuff or to reheat leftovers, as long as it doesn't break down in a hurry.

    Just wondering--it that a Whirlpool? What other brands have you tried?
    Pam Carpenter thanked victorianbungalowranch
  • 13 years ago
    I have had two 2 Maytag over the range microwaves & never had a problem.
    Pam Carpenter thanked lucyhomedecor
  • 13 years ago
    Replace with stainless hood.
    Pam Carpenter thanked Nancy Travisinteriors
  • 13 years ago
    This one is a Whirlpool. I have tried GE and another brand....I can't remember the brand. My sister-in-law's GE was almost identical to mine and hers did the same thing. She changed over to stainless steel. I guess that's what I'll have to do too. Never thought about it being a fire hazard of having wood so close to the range top.
  • PRO
    13 years ago
    Just did a quick search for the part - found one on Appliance Parts Pros.com for $160. So you have to compare the repair cost with the modification cost...( http://www.appliancepartspros.com/whirlpool-complete-door-8206394-ap3886233.html)

    In looking at the picture, it looks like the bottom of the microwave is at or below the adjacent cabinets. This often means the builder designed the kitchen for a vent hood, and someone replaced it with a microwave vent hood combo. If this is the case, the MW may be too low, causing the heat to crack the doors. Can the upper cabinet be modified to raise the height of the MW/Hood? Or as someone above mentioned - replace with a normal hood, then install a microwave drawer maybe in a lower cabinet? Just thinking out loud. Best of luck - Robert
  • 13 years ago
    I'm not a fan of the OTR microwaves in the slightest. Having to reach up to remove potentially very hot items from such a height doesn't make sense to me.

    Nor does having a ventilation system built around a big box. Take a straw and blow on your open hand, then bend the straw as if it were a box corner and see how much air you can then move.

    However, you are limited for space, and it's very unlikely that your tiled backsplash extends high enough with the OTR removed to maintain the esthetics of your kitchen.

    So I'd recommend a Panasonic Genius, if they're available where you live.

    You could also research and maybe find a convection OTR microwave, that would essentially give you a second oven.

    The best pointers I've ever heard were to buy an OTR based upon the brightness of the lights over the cooking area, and to turn the fan on just before the fridge or pantry door is opened, to create a breeze that will aid in the kitchen air exchange when the actual cooking begins.

    Good luck with your dilemma.
    Pam Carpenter thanked deanspuraway
  • 7 years ago

    I tried to start a post with a similar crack and questions but it won't let me post pictures for some reason. So I'll try it here :) Is there any kind of bonding/filler I can use on a cracked thin plastic door frame on my over-the-range microwave, and any touch up paint recommendations? I called Whirpool and they said they weren't technicians and couldn't answer re the bonding/filler material, and said they don't have the touch up paint for my model (which was manufactured in 2012). Is there a cosmetic fix? I really don't want to have to purchase a new one. Anyone able to point me in the right direction?


  • 6 years ago

    Hi Neesey57. I have a crack a little bit further apart in nearby are of my microwave. I would just like to see if you ever were able to find a bonding/filler material for it? We do not have the money to replace the microwave, and it does not effect the way the microwave works. Just cosmetic. Thank you so much!

  • 6 years ago

    We have a similar crack and were able to seal it with Loctite Stik N Seal Extreme Conditions. We cleaned the area well, applied to both sides of the crack with a toothpick, let it sit for five minutes to get tacky then used blue painter’s to hold it together for a couple hours to cure.

  • 6 years ago

    Thank you so much!!

  • 6 years ago

    Hello, we rented a place where ours cracked like that and I am not sure how this happen at all, would this be just normal use from cooking under it?

  • 6 years ago

    I think it’s a combination of the heat weakening the plastic and the frame absorbing the impact there. Our microwave also closes itself so I’m assuming it’s not quite level. So if you are pulling something hot out with both hands and can’t catch the door before it closes it slams. Ours cracked in literally the same place as the photo for this thread and an replacement door is over $200 for our model.

  • 5 years ago
    last modified: 5 years ago

    Just wanted to add to this forum I’ve had this GE microwave for eight months and I barely use the microwave and I have not one but I have two cracks. This is by no means user error or hard door slammers, It must be from the heat of the stove and therefore some kind of defect with these makers of these microwaves


  • 5 years ago

    Ours cracked in exactly the same spot and tonight when i opened the door the whole bottom plastic piece fell off. Maytag no longer makes replacement part. The whole unit is only 5 years old. So frustrating. After reading this discussion will probably not replace it with another combo unit although it was mounted at the correct distance

  • 5 years ago

    I have a related problem with the black plastic panel that is under my Sharp microwave. the heat from the stove melted the plastic. The specs say it is built to withstand that, so clearly that was wrong. The panel is not available for purchase anymore.


    Does anyone have any ideas about what part I could use to fix this? We are selling the house and just want it to look nice (guessing new owners likely to remodel anyway).




  • 3 years ago


    Mine has been broken since we moved in, and it just seems to get worse as we open the door. my only question is.. is it safe to use? my kids use it and stabd in front if it waiting for whatever they are heating. so i have just thought of the crack not being safe if putting out radiation ? can anyone tell me if this is true or if its okay until i can replace?

Sponsored
Mary Shipley Interiors
Average rating: 4.8 out of 5 stars34 Reviews
Columbus OH Premier Interior Designer 10x Best of Houzz