Software
Houzz Logo Print
jjcarnell

Board Texture

12 years ago
On the James Hardie board & batten, did you use smooth or cedarmill? Love the look!
modern farmhouse · More Info

Comments (12)

  • PRO
    12 years ago
    We used smooth (always smooth). In this case the siding was primed panels field painted as were the battens. I'd prefer to use their factory painted system in the future.
  • 11 years ago

    Hi, I am curious why "always smooth". We are building a less contemporary farmhouse, but I do intend to use the James Hardie board & batten on most of it. Is it more of a contemporary look, or is there another reason? Thanks so much.

  • 11 years ago

    Good point. I will definitely keep that in mind for our home. I am always trying to make things look more "authentic", but you are right, the grain seldom shows through. Thanks for the quick response.

  • PRO
    11 years ago

    I always recommend getting samples of all products before you commit to them - not just for color. I wrote about that recently in my blog. https://thinkarchitect.wordpress.com/2015/09/01/sample-please/. Good luck on your project. The details matter most.

  • 8 years ago

    Lee CALISTI...curious why you'd prefer to use the factory painted system in the future?

  • PRO
    8 years ago
    I have found that the factory paint has a better sheen to it, it has better coverage and it comes with a warranty. The only downside is the colors are limited.
  • 8 years ago

    Thanks!! Passing this on to my builder. I recently saw the Arctic White in person. Was a nice clean white. No overt tones.

  • 8 years ago

    lee Calisti... I spoke to my builder about the pre-finished Hardie. He agreed to all the upsides...but didn't think board and batten can be done WELL in pre-finished. Something about too many nail heads showing. And pre-finished battens getting expensive. Any thoughts?

  • PRO
    8 years ago
    Then you could research a better than usual paint, then confirm it with James Hardie. See if exceptional paint is less costly to touching up nail heads. Try Sherwin Williams special coatings.
  • PRO
    8 years ago
    The battens that are unfinished have a raw edge that you may find objectionable. Get samples first.
  • 8 years ago
    Thank you. All good info!