Brian Vanden Brink Photographer New barn Entrance
Large farmhouse gray floor double front door photo in Portland Maine with beige walls and a glass front door

Photography by Miha Matei. Project completed through Homepolish.
Example of an eclectic kitchen design in San Francisco

Terren Landscapes http://www.terrenlandscapes.com Project Entry: Pembrooke Estate Rain Garden 2014 PLNA Awards for Landscape Excellence Winner Category: Sustainable Landscape &60,000-$120,000 Award Level: Silver Project Description: The client contracted our company to solve multiple existing drainage problems. In a heavy rain event the existing French drain system would overflow, causing water to pool in the driveway. After investigating the system we found that the capacity of the French drain was undersized for the amount of storm water from the large rain events received in recent years. As a result of our findings and at the request of the homeowner, we designed a storm water management system to capture all storm water from the structures on the property and regenerate the underground aquifers for the volume of a 5.8” rainstorm. In addition to the new drain system, the homeowners wanted a rain garden to provide a backdrop for an existing formal garden, provide a habitat for wildlife, and provide screening from an adjacent neighbor. Throughout the design process many challenges were presented, including an existing gas line, which ran directly through the area that best suited the bioswale. The existence of the gas line caused us to alter the shape and depth of the bioswale in some areas. We also inspected the existing downspouts to make sure there were no obstructions that would impede the system’s efficiency, and then conducted a test pit dig to make sure we had sufficient percolation rates for disposal of storm water. To effectively capture the storm water runoff, the existing downspouts were piped from the main house and the large detached garage to a large catch basin located at the low point in the driveway. The driveway catch basin contains two outlet pipes at different elevations within the basin allowing water from smaller rain events to enter the bioswale and rain garden area to percolate into the soil before excess water overflows into a sediment trap which filters out any debris and is then piped to an underground StormTech® pit to slowly percolate into the ground. The other outlet pipe in the driveway catch basin is used for larger storm water events, taking the water directly to the StormTech® pit. Accepting and slowing the velocity of the storm water, mitigation of erosion, and filtering out pollutants contained in the “first flush” of rainfall are the primary functions of the bioswale and rain garden. Planting these areas with mostly native plant species helps carry out these functions while attracting and providing shelter for wildlife. The ‘Niobe’ weeping willow is the centerpiece of the rain garden, connecting with the axis of the existing formal garden. To screen the neighboring property we chose Chamaecyparis nootkatensis ‘Pendula’ for its graceful evergreen habit and tolerance of wet sites. ‘Ivory Halo’ dogwood and Panicum ‘Cloud Nine’ were used for screening as well as winter interest. To provide deciduous structure to the garden Taxodium distichum and Magnolia virginiana were used in conjunction with witch hazel. Mostly native wetland perennials were used due to their tolerance of wet conditions and occasional drought. The area above the StormTech® pit provides space for the client’s family to relax. The rain garden and bioswale provide screening, storm water management, a habitat for wildlife, and plants that enhance the adjacent formal garden. Photo Credit: Terren Landscapes

http://www.advanceddigitalphotography.com/
Staircase - mid-sized rustic wooden l-shaped mixed material railing staircase idea in Burlington with wooden risers

Terren Landscapes http://www.terrenlandscapes.com Project Entry: Pembrooke Estate Rain Garden 2014 PLNA Awards for Landscape Excellence Winner Category: Sustainable Landscape &60,000-$120,000 Award Level: Silver Project Description: The client contracted our company to solve multiple existing drainage problems. In a heavy rain event the existing French drain system would overflow, causing water to pool in the driveway. After investigating the system we found that the capacity of the French drain was undersized for the amount of storm water from the large rain events received in recent years. As a result of our findings and at the request of the homeowner, we designed a storm water management system to capture all storm water from the structures on the property and regenerate the underground aquifers for the volume of a 5.8” rainstorm. In addition to the new drain system, the homeowners wanted a rain garden to provide a backdrop for an existing formal garden, provide a habitat for wildlife, and provide screening from an adjacent neighbor. Throughout the design process many challenges were presented, including an existing gas line, which ran directly through the area that best suited the bioswale. The existence of the gas line caused us to alter the shape and depth of the bioswale in some areas. We also inspected the existing downspouts to make sure there were no obstructions that would impede the system’s efficiency, and then conducted a test pit dig to make sure we had sufficient percolation rates for disposal of storm water. To effectively capture the storm water runoff, the existing downspouts were piped from the main house and the large detached garage to a large catch basin located at the low point in the driveway. The driveway catch basin contains two outlet pipes at different elevations within the basin allowing water from smaller rain events to enter the bioswale and rain garden area to percolate into the soil before excess water overflows into a sediment trap which filters out any debris and is then piped to an underground StormTech® pit to slowly percolate into the ground. The other outlet pipe in the driveway catch basin is used for larger storm water events, taking the water directly to the StormTech® pit. Accepting and slowing the velocity of the storm water, mitigation of erosion, and filtering out pollutants contained in the “first flush” of rainfall are the primary functions of the bioswale and rain garden. Planting these areas with mostly native plant species helps carry out these functions while attracting and providing shelter for wildlife. The ‘Niobe’ weeping willow is the centerpiece of the rain garden, connecting with the axis of the existing formal garden. To screen the neighboring property we chose Chamaecyparis nootkatensis ‘Pendula’ for its graceful evergreen habit and tolerance of wet sites. ‘Ivory Halo’ dogwood and Panicum ‘Cloud Nine’ were used for screening as well as winter interest. To provide deciduous structure to the garden Taxodium distichum and Magnolia virginiana were used in conjunction with witch hazel. Mostly native wetland perennials were used due to their tolerance of wet conditions and occasional drought. The area above the StormTech® pit provides space for the client’s family to relax. The rain garden and bioswale provide screening, storm water management, a habitat for wildlife, and plants that enhance the adjacent formal garden. Photo Credit: Terren Landscapes

Brian Vanden Brink Photographer
Example of a farmhouse dark wood floor and brown floor family room design in Portland Maine with beige walls

Kitchen - 1950s kitchen idea in Portland

Inspiration for a transitional deck remodel in New York with no cover

Kitchen Bar
Home bar - transitional single-wall medium tone wood floor and brown floor home bar idea in New York with shaker cabinets, black cabinets, gray backsplash and black countertops

What simply started out as the purchase of a 30” Wolf gas stove to replace the old, turned into a complete kitchen renovation. The original intent was to replace the existing stove with the new. The new Wolf came other issues one being installing an adequate exhaust system to meet the needs of the stove. One thing led to the next and with that a new kitchen. The renovation included removing all existing fixtures, cabinetry and lighting. The existing tile floor remained the same but with some added area that was previously under existing base cabinets. The goal of the project, once the decision was made to do a complete renovation, was to update the kitchen creating an eclectic aesthetic with all new fixtures of the best quality that could be afforded. Listed below are the changes that were made. All fixtures remained in their existing locations other than removing small piece of wall that allowed an extended length of the new bakers table to extend 24” into the existing dining and living room space to pull the spaces together and provide a small eating bar with adjoining bar stools. One stool was a custom design and fabrication (Marlin Stool) Fixtures 1. Existing gas stove replaced with new 30” gas Wolf stove. 2. Existing Refrigerator replace with new 36” stainless steel Jen-Air refrigerator with bottom freezer. 3. Existing Dishwasher replace with new Jen-Air stainless steel interior and exterior dishwasher. 4. Existing base cabinets replaced with a combination of open and closed tables and cabinets. Two stainless steel commercial kitchen tables with an open bases and shelving. One with a stainless steel top the other a bakers table with a wood butcher block top. The cabinets were Kraft Made traditional wood base cabinets with a Kaffe finish and Fireslate counter surface. These cabinets were customized with stainless steel perforated door inserts and Mockett stainless steel drawer and door pulls. 5. Surface counter and table material included wood butcher block, stainless steel and Fireslate. 6. Overhead shelving included open commercial kitchen stainless steel shelves and open Appleply wood shelves with Rakks aluminum shelf brackets. 7. Existing lighting was replaced with Zumtobel track lighting with Ushio lamps, Lutron dimmers and an up lighted coffered ceiling (see Superman). 8. Existing kitchen sink was replaced with a large single compartment sink from Kindred with an In-Sinkerator Evolution garbage disposal. Filter water tap was added that connects to an Everprue water filter system. 9. Walls were tiled with Bottle Green 4 1/4” x 4 1/4” Daltile to staying consistent with existing original house tile. 10. The ceiling was reworked as required with a plaster finish 11. Marine grade caulk was used as required. 12. A soffit with up lighting was added to the periphery of kitchen facing the adjoining living and dining rooms. 13. Silver Masonite peg board storage wall adjacent to refrigerator. Credits: • Little Pete the Parakeet.....for being there • Catalina Aguirre.....pots • Many Friends....pots • David D’Imperio.....Sputnik lamp • Jose Maria Concha Sali.....painting • Ron Meyers.....Plates on wall • Bill Sanders.....Bunny screen painting • William Hoffman....Beverly lamp • William Hoffman.....marlin stool • William Hoffman.....Gulfstream side chair • William Hoffman.....Gulfstream dining table • William Hoffman.....5 from 1 plywood chair Problems • A custom fabricated exhaust duct was required due to existing soffit framing conditions. • The ceiling was not parallel to the floor so the intended full wall tile installation was held short of the ceiling. • Return Air duct to A/C air handler required relocation Project cost • +/- $22,000 Fixtures, materials and appliances Selection of fixtures, materials and fixtures were made based on quality, aesthetic and cost. Extensive research was done to find the best quality at a price point that was affordable. Items that were splurged on were the Wolf stove and Jen-Air refrigerator and dishwasher and the Zumtobel lighting Bill Sanders Photography

Photo: Caroline Sharpnack © 2018 Houzz
Eclectic bathroom photo in Nashville

Kitchen - coastal kitchen idea in Santa Barbara with flat-panel cabinets, light wood cabinets, wood countertops, paneled appliances and a peninsula

What simply started out as the purchase of a 30” Wolf gas stove to replace the old, turned into a complete kitchen renovation. The original intent was to replace the existing stove with the new. The new Wolf came other issues one being installing an adequate exhaust system to meet the needs of the stove. One thing led to the next and with that a new kitchen. The renovation included removing all existing fixtures, cabinetry and lighting. The existing tile floor remained the same but with some added area that was previously under existing base cabinets. The goal of the project, once the decision was made to do a complete renovation, was to update the kitchen creating an eclectic aesthetic with all new fixtures of the best quality that could be afforded. Listed below are the changes that were made. All fixtures remained in their existing locations other than removing small piece of wall that allowed an extended length of the new bakers table to extend 24” into the existing dining and living room space to pull the spaces together and provide a small eating bar with adjoining bar stools. One stool was a custom design and fabrication (Marlin Stool) Fixtures 1. Existing gas stove replaced with new 30” gas Wolf stove. 2. Existing Refrigerator replace with new 36” stainless steel Jen-Air refrigerator with bottom freezer. 3. Existing Dishwasher replace with new Jen-Air stainless steel interior and exterior dishwasher. 4. Existing base cabinets replaced with a combination of open and closed tables and cabinets. Two stainless steel commercial kitchen tables with an open bases and shelving. One with a stainless steel top the other a bakers table with a wood butcher block top. The cabinets were Kraft Made traditional wood base cabinets with a Kaffe finish and Fireslate counter surface. These cabinets were customized with stainless steel perforated door inserts and Mockett stainless steel drawer and door pulls. 5. Surface counter and table material included wood butcher block, stainless steel and Fireslate. 6. Overhead shelving included open commercial kitchen stainless steel shelves and open Appleply wood shelves with Rakks aluminum shelf brackets. 7. Existing lighting was replaced with Zumtobel track lighting with Ushio lamps, Lutron dimmers and an up lighted coffered ceiling (see Superman). 8. Existing kitchen sink was replaced with a large single compartment sink from Kindred with an In-Sinkerator Evolution garbage disposal. Filter water tap was added that connects to an Everprue water filter system. 9. Walls were tiled with Bottle Green 4 1/4” x 4 1/4” Daltile to staying consistent with existing original house tile. 10. The ceiling was reworked as required with a plaster finish 11. Marine grade caulk was used as required. 12. A soffit with up lighting was added to the periphery of kitchen facing the adjoining living and dining rooms. 13. Silver Masonite peg board storage wall adjacent to refrigerator. Credits: • Little Pete the Parakeet.....for being there • Catalina Aguirre.....pots • Many Friends....pots • David D’Imperio.....Sputnik lamp • Jose Maria Concha Sali.....painting • Ron Meyers.....Plates on wall • Bill Sanders.....Bunny screen painting • William Hoffman....Beverly lamp • William Hoffman.....marlin stool • William Hoffman.....Gulfstream side chair • William Hoffman.....Gulfstream dining table • William Hoffman.....5 from 1 plywood chair Bill Sanders Photography

Inspiration for a contemporary open concept medium tone wood floor and brown floor living room remodel in San Francisco with white walls and a standard fireplace

Example of a beach style bathroom design in San Francisco with a hinged shower door

Photo: Camille Simmons © 2014 Houzz
Small eclectic white tile mosaic tile floor and blue floor bathroom photo in San Francisco with raised-panel cabinets, white cabinets, white walls and white countertops

VISTA - Pewter
Trendy bathroom photo in Houston

BELLOW PEWTER
Inspiration for a contemporary bathroom remodel in Houston

Example of a trendy galley dark wood floor and brown floor kitchen design in New York with an undermount sink, flat-panel cabinets, medium tone wood cabinets, white backsplash, stainless steel appliances, a peninsula and white countertops