Here we have a six year old Indian Sandstone tiled floor located a property on the outskirts of Lancaster. Measuring 100 metres squared, the very large floor had under floor heating in the concrete sub base. The type of stone used inside the property is what we commonly refer to as ‘patio Sandstone’, a material which is usually used outside because of its very rough texture. It’s not particularly comfortable to walk across in bare feet, hence why many people consider it be impractical for internal flooring. Nonetheless, the property owner was keen to make the rough textured floor as feet-friendly as possible for people walking over it. At Tile Doctor we have developed a process known as milling, which utilises diamond encrusted pads combined with a weighted rotary machine to smooth the rough surface, leaving it looking and feeling a lot nicer and more practical to live with. The milling process is only done once, but while the Sandstone will still need cleaning and sealing in the future, it won’t be nearly as difficult as when it was rough. The job would take over two weeks to complete due to the fact that the existing grout needed to be removed and replaced with a flexible floor grout: a very time consuming process. As mentioned, the surface of the Sandstone was very rough, and so needed to be milled down to make it a lot smoother to look after and make it easy to clean and seal. This was achieved by using Tile Doctor’s 50 Grit diamond encrusted burnishing pads, fitted to a weighed rotary machine and run along the entire surface area of the floor. Through this process the stone became much smoother and more aesthetic – completing one of our main objectives for the customer. Next, we started breaking out the already loose and badly applied grout with our grout removal tools. The builder who had installed the floor had used a sand/cement-based grout which wasn’t flexible. As a result, it started to crumble and loosen quite quickly after exposure to the underfloor heating. We removed this and replaced it with a far more flexible grout. Once the whole area had been successfully milled and the grout replaced, the Sandstone floor was left to dry out over the weekend. Upon our return to the property, we cleaned off any dust and resin left over from the milling and grouting processes, before leaving it to dry for a further 24 hours. The next day we returned to seal the whole floor with two coats of our impregnating sealer Tile Doctor Colour Grow. The sealer fills the pores of the Sandstone to prevent ingrained dirt and stains, while also emphasising the natural colours in the stone. It also provides a robust matte finish, which is what the customer wished for. It wasn’t the easiest of processes to get the Indian Sandstone into a condition where it would be both suitable for internal flooring and aesthetically pleasing, but the results proved to be very much worth the time and effort invested. The customer was very pleased with the transformation. Russell Taylor Lancashire Tile Doctor

Erik Grammer Photography - I recently came across a post on Facebook with a photo of an elderly couple with a quote saying "We were born in a time when if something was broken we would fix it, not throw it away..." This quote resonated with me. I found myself thinking of it while working on the same house - for the fourth time. I affectionately call this beautiful Southern California beach house the Humpty Dumpty home. I started a wonderful business relationship with one of my favorite clients back in 2003. Initially, I was called in to "fix" and finish what another designer started. Once completed and with everything just so, the couple unfortunately divorced and amicably divided the art, rugs and furnishings. I was hired for a second time to recreate each room as close as possible to replace all items that were missing. The house was happily restored back to the original design and all was well for a few years. My client relocated to the East Coast for a temporary job assignment and the house was rented to a person (whose name I can't say) from a famous all-girl band. During this time there was a problem with the upstairs laundry room and water damage occurred. I was hired for the third time to help repair and update (ever so slightly) some areas in the house. My client requested to keep the design and feeling of the house intact because he loved it so much. A few years passed before a pipe broke in the master bathroom while the new renter was out of town on vacation. Unfortunately, things like this do happen - and if not attended to quickly, major damage can occur. In this case, nearly the entire house was flooded requiring it to be completely gutted and stripped down to the floorboards and studs. In January of this year, I was hired to help the client, the insurance company, and the contractor put the house back together again. But unlike the Humpty Dumpty story, this house has actually been put back together again - several times over. Although, this house and client have experienced some challenges, I say this is a perfect example of design success. My client has had many opportunities to change and create something new in his environment with every mis-adventure. Instead, he realizes his home is exactly the way he likes it. It has been such an honor to work with this man who is definitive, trusting, and confident enough to create (or re-create) the perfect home that "fits" his personality and lifestyle. Although this Humpty Dumpty home has been good for my business, I hope the next project with this client is to decorate another property - perhaps a New York City Apartment!

The following job was a bit different from the kitchen and hallway restorations we normally get asked to do, in fact this request came from the vicar of St. Mary’s Church in Far Cotton who wanted us to restore some beautiful old Quarry tiles which lead up to the main aisle. The church dates back to 1885 and given the wear on some of the tiles I can only assume they date back to the same Victorian period; the church is a really welcoming, community-focused place, so it was a pleasure for me to be asked to complete the work. The vicar’s main concern was the large amount of melted candle wax around the font – so much so that this his normal cleaners had been unable to remove it. He also wanted to know if the floors could be sealed to make ongoing maintenance easier – and this was certainly something we would be able to provide. The following photos show the condition of the floor before we started. The next photo shows the work in progress from halfway down the aisle. We started by breaking down any old sealer and the troublesome candle wax, using a black stripping pad in combination of Tile Doctor Pro Clean to deep clean the floor. Since Pro Clean, a high alkaline cleaner, is highly versatile and can be used on all kinds of natural stone and tile. While the church has cleaners that come in regularly to keep the building tidy for the parishioners, the old tiles really benefitted from a deep clean which tackled the stubborn ingrained dirt and staining that had built up over many years. Once I was satisfied that the tiles had been cleaned to the best of my abilities, they were then left for two weeks to fully dry as it is an old church and, understandably, there were some inherent damp issues. As aforementioned, the vicar was keen to have the tiles sealed to make them easier to keep clean and protect them against ingrained dirt and staining for the future. There are only a few situations in which we wouldn’t recommend sealing tiles, such as if they are patio tiles which will already be under constant exposure to the weather. The best choice of sealer for this particular situation was Tile Doctor Colour Grow, which is an impregnating, breathable sealer that won’t trap moisture in the floor and will provide great protection against further staining. Additionally, as an impregnating sealer, Colour Grow penetrates into the pores of the tile protecting it from within and with the added benefit of enhancing the natural colours and restoring the life and character back in the old, dull tiles. I applied it using a paint pad, before polishing it off. I’m pleased to report that the restoration was a great success. The vicar was very impressed with the work, and I’m sure the church community will also be very happy with the new, vibrant tiles. Phil Vissian Northamptonshire Tile Doctor

Designing and building a kitchen addition is a complex process that involves multiple steps and considerations. Here is a general outline to help you get started on your kitchen addition project: Define Your Goals and Budget: • Determine the purpose of the kitchen addition. Is it for more cooking space, a dining area, or a combination of both? • Establish a realistic budget for your project. Consider all costs, including construction, permits, materials, and furnishings. Hire a Design Professional: • Seek the services of a design build company who specializes in kitchen additions. • Discuss your vision, needs, and budget with the design professional to create a design concept. Site Evaluation: • Assess the existing space and structural condition of your home to ensure it can support the addition. • Consider factors like zoning regulations, setbacks, and building codes. Design Development: • Collaborate with your design professional to refine the concept, including the layout, size, and architectural style. • Choose materials, finishes, and fixtures that fit your design and budget. Obtain Permits: • Consult with your local design build contractor to determine the necessary permits and approvals. • Prepare and submit all required documents, including architectural drawings and engineering plans. Create Construction Documents: • Work with your design build professional to develop detailed construction drawings and specifications. • These documents will serve as a guide for contractors during construction. Hire a design build contractor: • Check references, credentials, and licenses before selecting a contractor. • Sign a detailed contract that outlines the scope of work, timeline, and payment schedule. Construction Phase: • Demolition: If needed, remove any existing structures or walls. • Foundation: Construct the foundation for the addition. • Framing: Build the structural framework of the addition. • Plumbing, Electrical, and HVAC: Install or update utilities as required. • Insulation: Ensure proper insulation for energy efficiency. • Drywall and Finish Work: Complete the walls and ceilings. • Flooring and Cabinetry: Install flooring and kitchen cabinets. • Appliances and Fixtures: Add appliances, plumbing fixtures, and lighting. • Paint and Finish: Apply paint and finishes to achieve the desired look. • Final Inspection: Schedule inspections to ensure compliance with building codes. Final Inspections and Approvals: • Arrange for final inspections to ensure the addition meets all safety and code requirements. • Obtain any necessary certificates of occupancy or compliance. Move In and Enjoy: • Once all inspections and approvals are received, you can move into your new kitchen addition and start enjoying it. Remember that every kitchen addition project is unique, so adapt this outline to your specific needs and circumstances. Consulting with professionals and obtaining the required permits and inspections is crucial to a successful and safe project.

Designing and building a kitchen addition is a complex process that involves multiple steps and considerations. Here is a general outline to help you get started on your kitchen addition project: Define Your Goals and Budget: • Determine the purpose of the kitchen addition. Is it for more cooking space, a dining area, or a combination of both? • Establish a realistic budget for your project. Consider all costs, including construction, permits, materials, and furnishings. Hire a Design Professional: • Seek the services of a design build company who specializes in kitchen additions. • Discuss your vision, needs, and budget with the design professional to create a design concept. Site Evaluation: • Assess the existing space and structural condition of your home to ensure it can support the addition. • Consider factors like zoning regulations, setbacks, and building codes. Design Development: • Collaborate with your design professional to refine the concept, including the layout, size, and architectural style. • Choose materials, finishes, and fixtures that fit your design and budget. Obtain Permits: • Consult with your local design build contractor to determine the necessary permits and approvals. • Prepare and submit all required documents, including architectural drawings and engineering plans. Create Construction Documents: • Work with your design build professional to develop detailed construction drawings and specifications. • These documents will serve as a guide for contractors during construction. Hire a design build contractor: • Check references, credentials, and licenses before selecting a contractor. • Sign a detailed contract that outlines the scope of work, timeline, and payment schedule. Construction Phase: • Demolition: If needed, remove any existing structures or walls. • Foundation: Construct the foundation for the addition. • Framing: Build the structural framework of the addition. • Plumbing, Electrical, and HVAC: Install or update utilities as required. • Insulation: Ensure proper insulation for energy efficiency. • Drywall and Finish Work: Complete the walls and ceilings. • Flooring and Cabinetry: Install flooring and kitchen cabinets. • Appliances and Fixtures: Add appliances, plumbing fixtures, and lighting. • Paint and Finish: Apply paint and finishes to achieve the desired look. • Final Inspection: Schedule inspections to ensure compliance with building codes. Final Inspections and Approvals: • Arrange for final inspections to ensure the addition meets all safety and code requirements. • Obtain any necessary certificates of occupancy or compliance. Move In and Enjoy: • Once all inspections and approvals are received, you can move into your new kitchen addition and start enjoying it. Remember that every kitchen addition project is unique, so adapt this outline to your specific needs and circumstances. Consulting with professionals and obtaining the required permits and inspections is crucial to a successful and safe project.

Designing and building a kitchen addition is a complex process that involves multiple steps and considerations. Here is a general outline to help you get started on your kitchen addition project: Define Your Goals and Budget: • Determine the purpose of the kitchen addition. Is it for more cooking space, a dining area, or a combination of both? • Establish a realistic budget for your project. Consider all costs, including construction, permits, materials, and furnishings. Hire a Design Professional: • Seek the services of a design build company who specializes in kitchen additions. • Discuss your vision, needs, and budget with the design professional to create a design concept. Site Evaluation: • Assess the existing space and structural condition of your home to ensure it can support the addition. • Consider factors like zoning regulations, setbacks, and building codes. Design Development: • Collaborate with your design professional to refine the concept, including the layout, size, and architectural style. • Choose materials, finishes, and fixtures that fit your design and budget. Obtain Permits: • Consult with your local design build contractor to determine the necessary permits and approvals. • Prepare and submit all required documents, including architectural drawings and engineering plans. Create Construction Documents: • Work with your design build professional to develop detailed construction drawings and specifications. • These documents will serve as a guide for contractors during construction. Hire a design build contractor: • Check references, credentials, and licenses before selecting a contractor. • Sign a detailed contract that outlines the scope of work, timeline, and payment schedule. Construction Phase: • Demolition: If needed, remove any existing structures or walls. • Foundation: Construct the foundation for the addition. • Framing: Build the structural framework of the addition. • Plumbing, Electrical, and HVAC: Install or update utilities as required. • Insulation: Ensure proper insulation for energy efficiency. • Drywall and Finish Work: Complete the walls and ceilings. • Flooring and Cabinetry: Install flooring and kitchen cabinets. • Appliances and Fixtures: Add appliances, plumbing fixtures, and lighting. • Paint and Finish: Apply paint and finishes to achieve the desired look. • Final Inspection: Schedule inspections to ensure compliance with building codes. Final Inspections and Approvals: • Arrange for final inspections to ensure the addition meets all safety and code requirements. • Obtain any necessary certificates of occupancy or compliance. Move In and Enjoy: • Once all inspections and approvals are received, you can move into your new kitchen addition and start enjoying it. Remember that every kitchen addition project is unique, so adapt this outline to your specific needs and circumstances. Consulting with professionals and obtaining the required permits and inspections is crucial to a successful and safe project.

Designing and building a kitchen addition is a complex process that involves multiple steps and considerations. Here is a general outline to help you get started on your kitchen addition project: Define Your Goals and Budget: • Determine the purpose of the kitchen addition. Is it for more cooking space, a dining area, or a combination of both? • Establish a realistic budget for your project. Consider all costs, including construction, permits, materials, and furnishings. Hire a Design Professional: • Seek the services of a design build company who specializes in kitchen additions. • Discuss your vision, needs, and budget with the design professional to create a design concept. Site Evaluation: • Assess the existing space and structural condition of your home to ensure it can support the addition. • Consider factors like zoning regulations, setbacks, and building codes. Design Development: • Collaborate with your design professional to refine the concept, including the layout, size, and architectural style. • Choose materials, finishes, and fixtures that fit your design and budget. Obtain Permits: • Consult with your local design build contractor to determine the necessary permits and approvals. • Prepare and submit all required documents, including architectural drawings and engineering plans. Create Construction Documents: • Work with your design build professional to develop detailed construction drawings and specifications. • These documents will serve as a guide for contractors during construction. Hire a design build contractor: • Check references, credentials, and licenses before selecting a contractor. • Sign a detailed contract that outlines the scope of work, timeline, and payment schedule. Construction Phase: • Demolition: If needed, remove any existing structures or walls. • Foundation: Construct the foundation for the addition. • Framing: Build the structural framework of the addition. • Plumbing, Electrical, and HVAC: Install or update utilities as required. • Insulation: Ensure proper insulation for energy efficiency. • Drywall and Finish Work: Complete the walls and ceilings. • Flooring and Cabinetry: Install flooring and kitchen cabinets. • Appliances and Fixtures: Add appliances, plumbing fixtures, and lighting. • Paint and Finish: Apply paint and finishes to achieve the desired look. • Final Inspection: Schedule inspections to ensure compliance with building codes. Final Inspections and Approvals: • Arrange for final inspections to ensure the addition meets all safety and code requirements. • Obtain any necessary certificates of occupancy or compliance. Move In and Enjoy: • Once all inspections and approvals are received, you can move into your new kitchen addition and start enjoying it. Remember that every kitchen addition project is unique, so adapt this outline to your specific needs and circumstances. Consulting with professionals and obtaining the required permits and inspections is crucial to a successful and safe project.

Designing and building a kitchen addition is a complex process that involves multiple steps and considerations. Here is a general outline to help you get started on your kitchen addition project: Define Your Goals and Budget: • Determine the purpose of the kitchen addition. Is it for more cooking space, a dining area, or a combination of both? • Establish a realistic budget for your project. Consider all costs, including construction, permits, materials, and furnishings. Hire a Design Professional: • Seek the services of a design build company who specializes in kitchen additions. • Discuss your vision, needs, and budget with the design professional to create a design concept. Site Evaluation: • Assess the existing space and structural condition of your home to ensure it can support the addition. • Consider factors like zoning regulations, setbacks, and building codes. Design Development: • Collaborate with your design professional to refine the concept, including the layout, size, and architectural style. • Choose materials, finishes, and fixtures that fit your design and budget. Obtain Permits: • Consult with your local design build contractor to determine the necessary permits and approvals. • Prepare and submit all required documents, including architectural drawings and engineering plans. Create Construction Documents: • Work with your design build professional to develop detailed construction drawings and specifications. • These documents will serve as a guide for contractors during construction. Hire a design build contractor: • Check references, credentials, and licenses before selecting a contractor. • Sign a detailed contract that outlines the scope of work, timeline, and payment schedule. Construction Phase: • Demolition: If needed, remove any existing structures or walls. • Foundation: Construct the foundation for the addition. • Framing: Build the structural framework of the addition. • Plumbing, Electrical, and HVAC: Install or update utilities as required. • Insulation: Ensure proper insulation for energy efficiency. • Drywall and Finish Work: Complete the walls and ceilings. • Flooring and Cabinetry: Install flooring and kitchen cabinets. • Appliances and Fixtures: Add appliances, plumbing fixtures, and lighting. • Paint and Finish: Apply paint and finishes to achieve the desired look. • Final Inspection: Schedule inspections to ensure compliance with building codes. Final Inspections and Approvals: • Arrange for final inspections to ensure the addition meets all safety and code requirements. • Obtain any necessary certificates of occupancy or compliance. Move In and Enjoy: • Once all inspections and approvals are received, you can move into your new kitchen addition and start enjoying it. Remember that every kitchen addition project is unique, so adapt this outline to your specific needs and circumstances. Consulting with professionals and obtaining the required permits and inspections is crucial to a successful and safe project.

Designing and building a kitchen addition is a complex process that involves multiple steps and considerations. Here is a general outline to help you get started on your kitchen addition project: Define Your Goals and Budget: • Determine the purpose of the kitchen addition. Is it for more cooking space, a dining area, or a combination of both? • Establish a realistic budget for your project. Consider all costs, including construction, permits, materials, and furnishings. Hire a Design Professional: • Seek the services of a design build company who specializes in kitchen additions. • Discuss your vision, needs, and budget with the design professional to create a design concept. Site Evaluation: • Assess the existing space and structural condition of your home to ensure it can support the addition. • Consider factors like zoning regulations, setbacks, and building codes. Design Development: • Collaborate with your design professional to refine the concept, including the layout, size, and architectural style. • Choose materials, finishes, and fixtures that fit your design and budget. Obtain Permits: • Consult with your local design build contractor to determine the necessary permits and approvals. • Prepare and submit all required documents, including architectural drawings and engineering plans. Create Construction Documents: • Work with your design build professional to develop detailed construction drawings and specifications. • These documents will serve as a guide for contractors during construction. Hire a design build contractor: • Check references, credentials, and licenses before selecting a contractor. • Sign a detailed contract that outlines the scope of work, timeline, and payment schedule. Construction Phase: • Demolition: If needed, remove any existing structures or walls. • Foundation: Construct the foundation for the addition. • Framing: Build the structural framework of the addition. • Plumbing, Electrical, and HVAC: Install or update utilities as required. • Insulation: Ensure proper insulation for energy efficiency. • Drywall and Finish Work: Complete the walls and ceilings. • Flooring and Cabinetry: Install flooring and kitchen cabinets. • Appliances and Fixtures: Add appliances, plumbing fixtures, and lighting. • Paint and Finish: Apply paint and finishes to achieve the desired look. • Final Inspection: Schedule inspections to ensure compliance with building codes. Final Inspections and Approvals: • Arrange for final inspections to ensure the addition meets all safety and code requirements. • Obtain any necessary certificates of occupancy or compliance. Move In and Enjoy: • Once all inspections and approvals are received, you can move into your new kitchen addition and start enjoying it. Remember that every kitchen addition project is unique, so adapt this outline to your specific needs and circumstances. Consulting with professionals and obtaining the required permits and inspections is crucial to a successful and safe project.

Designing and building a kitchen addition is a complex process that involves multiple steps and considerations. Here is a general outline to help you get started on your kitchen addition project: Define Your Goals and Budget: • Determine the purpose of the kitchen addition. Is it for more cooking space, a dining area, or a combination of both? • Establish a realistic budget for your project. Consider all costs, including construction, permits, materials, and furnishings. Hire a Design Professional: • Seek the services of a design build company who specializes in kitchen additions. • Discuss your vision, needs, and budget with the design professional to create a design concept. Site Evaluation: • Assess the existing space and structural condition of your home to ensure it can support the addition. • Consider factors like zoning regulations, setbacks, and building codes. Design Development: • Collaborate with your design professional to refine the concept, including the layout, size, and architectural style. • Choose materials, finishes, and fixtures that fit your design and budget. Obtain Permits: • Consult with your local design build contractor to determine the necessary permits and approvals. • Prepare and submit all required documents, including architectural drawings and engineering plans. Create Construction Documents: • Work with your design build professional to develop detailed construction drawings and specifications. • These documents will serve as a guide for contractors during construction. Hire a design build contractor: • Check references, credentials, and licenses before selecting a contractor. • Sign a detailed contract that outlines the scope of work, timeline, and payment schedule. Construction Phase: • Demolition: If needed, remove any existing structures or walls. • Foundation: Construct the foundation for the addition. • Framing: Build the structural framework of the addition. • Plumbing, Electrical, and HVAC: Install or update utilities as required. • Insulation: Ensure proper insulation for energy efficiency. • Drywall and Finish Work: Complete the walls and ceilings. • Flooring and Cabinetry: Install flooring and kitchen cabinets. • Appliances and Fixtures: Add appliances, plumbing fixtures, and lighting. • Paint and Finish: Apply paint and finishes to achieve the desired look. • Final Inspection: Schedule inspections to ensure compliance with building codes. Final Inspections and Approvals: • Arrange for final inspections to ensure the addition meets all safety and code requirements. • Obtain any necessary certificates of occupancy or compliance. Move In and Enjoy: • Once all inspections and approvals are received, you can move into your new kitchen addition and start enjoying it. Remember that every kitchen addition project is unique, so adapt this outline to your specific needs and circumstances. Consulting with professionals and obtaining the required permits and inspections is crucial to a successful and safe project.

New 6000sqft custom home in Mississauga
French country exterior home photo in Toronto

Josh Partee Photography With sweeping views of the Willamette river and Mt. Hood, this Atwater Place condo was designed with a balance of minimalism and livability in mind. A complete kitchen remodel brought a dark interior kitchen to the light and a full furnishings package welcomed Los Angeles transplants home to their new modern and bright residence. Our clients, a retired camera operator for both feature films and television and a producer/production manager on numerous television series including Weeds and The Middle, relocated from their traditionally-styled LA bungalow to Portland in the Summer of 2014. The couple sought a design departure from their long-term California residence and a fresh start for their new life in the South Waterfront. With only two pieces of sentimental furniture and a handful of artwork included in the plan, we set out to create a comfortable and clean-lined furnishings package complimenting the broad southeast views. Organically shaped upholstery pieces juxtaposed with angular steel and wood tables create a soft balance in the open floor plan. Several custom pieces, including a dining table designed by our studio and a custom hand-blown glass chandelier crafted by Scott Schiesel with Lightlite compliment timeless pieces from Knoll, Herman Miller, and B&B Italia. The kitchen is designed to reflect light and create brilliance in a space that is otherwise naturally dark. A material balance of stainless steel, back painted glass, quartz composite, lacquer, and mirror all play their part in creating a vibrant cooking environment. We collectively decided to forgo the traditional island pendant for a linear commercial fixture that provides tremendous light to the prep surface and creates an unexpected architectural element. The mirrored prep island creates the illusion of open space while concealing casework and wine storage on the working side of the kitchen. It is worth noting that this project was designed and installed almost entirely while our clients were still living in LA and wrapping up professional obligations and selling their home. This afforded us the tremendous opportunity to send our clients to showrooms not available in Portland to view key pieces before final specification. Textiles and finish samples were approved via mail and communication took place over e-mail, telephone, and an occasional office visit. This unique process lead to a successful result and a beautifully balanced living environment.

From Mid-Century Classic to the Present An iconic design updated with comfort, function, and flow for today. A Remodel That Balances Past and Present What started as a desire to update a classic Eichler soon became an exploration of how Mid-Century Modern design can successfully evolve for today. The client, a tech professional with a passion for scuba diving and underwater photography, wanted a home that would both honor its original character and feel tailored to his daily life. A lifelong technology enthusiast, he still owns the very first Mac desktop he saved up for as a teenager working at Radio Shack, a detail that underscores his appreciation for design that melds function and form. Honoring Separation While Expanding Possibility Unlike many contemporary remodels where walls are opened up to create expansive living spaces, this project took a more restrained approach. The client valued the defined rooms of the original plan and wanted to preserve as much wall space as possible for displaying his large-format underwater photography. The emphasis was not on dramatic spatial reinvention, but on thoughtful refinements. Klopf Architecture shaped a gallery-like backdrop while also expanding the primary suite, modernizing materials and fixtures throughout the home, and improving the functionality and layout of the kitchen. The finished home feels at once timeless and renewed, an Eichler that continues to inspire while fully supporting the lifestyle of its present-day owner. A major turning point came mid-design. The original project brief had not included an addition, but as the reconfiguration of the primary bedroom and bath unfolded, it became clear that an expansion was the best approach to achieve the client’s vision of a more spacious suite. Fortunately, the adjustment came at a stage when revisions were still manageable and was integrated seamlessly, showing how thoughtful course corrections can strengthen a project rather than hinder it. Navigating Challenges With Precision The design development included multiple conceptual rounds, balancing preservation with subtle expansion. During construction, an existing post previously thought to be load-bearing turned out not to be. The structural engineer was able to pivot quickly, and both the post and the cross beam that had been intended to replace it could be omitted, allowing the original rhythm of the Eichler beam bays to be preserved. Sustainability was not just a checklist item, but a way to align the home with the client’s values of simplicity, efficiency, and long-term functionality. R-38 roof insulation reduced energy usage, solar panels with battery storage provided independence and resilience, and passive comfort strategies eliminated the need forenergy-intensive air conditioning. An electric vehicle charger and an on-demand hot water recirculation system (with call buttons as opposed to having constant circulation) add to the home’s long-term efficiency factors. Together, these moves created a home that is quieter, more comfortable, and better equipped for the future, qualities that supported the client’s pragmatic approach to design and living lightly. Details That Respect the Eichler DNA The remodel carries forward the Eichler’s original spirit while introducing new layers of modern livability. Originally, the house was approached along a deep, narrow walk, with the garage on one side and the house on the other, leaving the front door tucked far back within this chasm-like space. By pulling the entry forward, the design reshaped the arrival experience, creating a clearer threshold and a natural drop-off zone for bags, shoes, and keys. This shift also made room for a custom bench at the entry that extends seamlessly through the glass sidelight. The bench and drop-off zone now work together as a single, integrated sequence that supports everyday living while offering a tactile reminder of Eichler’s philosophy of connectedness. At the client’s request, Klopf reintroduced a classic Eichler gesture by extending the exterior siding into the entry and living room. The detail reinforces a sense of indoor/outdoor continuity while providing a subtle architectural surface that allows the client’s photography to take visual precedence. The signature concrete masonry wall at the front was reconstructed using blocks sourced to match the originals, now strengthened with rebar for seismic resilience while maintaining a private outdoor courtyard, visually extending the kitchen outward. A decorative trellis element, a detail borrowed from a neighboring Eichler, restores a familiar mid-century modern architectural motif. At the courtyard entry door, a custom etched glass sidelight with an ocean-themed design featuring kelp and jellyfish serves as a subtle homage to the client’s passion for deep-sea diving. Landscaping became an integral part of the overall transformation. The homeowner engaged landscape architect Randi Johnsen of Third Nature Studio to shape a series of calm, inviting outdoor rooms that read as a natural extension of the interiors. While technically outside of the core construction scope, the landscape design proved central to achieving a sense of completeness and connectedness across the property. Such whole-property considerations often emerge as design ideas take shape, underscoring the importance of flexibility in planning and budgeting, as well as close collaboration among the design team starting early in the process. The Value of Evolving Scope As with many custom residential projects, the scope evolved during the design process. What began as a targeted remodel grew to include a new/expanded primary suite, a rebuilt CMU patio wall for strength and longevity, and a solar panel array and battery storage for energy resilience and carbon-reduction. Each thoughtful decision represented a conscious investment in the home’s performance and character, rather than a cost overrun. The result was a project delivered on schedule, tailored precisely to the client’s lifestyle, and positioned to add long-term value both functionally and aesthetically. By embracing scope evolution as an opportunity rather than a challenge, and relying on good design paired with transparent communication, this remodel demonstrates how Eichler homes can be adapted for contemporary living without erasing their DNA. Klopf Architecture project team: John Klopf, AIA, and Klara Kevane, Elise Webb and Nicholas LaNasa. Contractor: Golden Cove Construction Landscape Design: Third Nature Studio Structural Engineer: Daniel Bastiao Design Photography: ©2025 Mariko Reed Year Completed: 2024 Location: Sunnyvale, CA

A beautifully designed room is one that perfectly balances scale, color, design and style in a space that makes the heart sign upon entering. We all have had this experience when visiting professionally designed fine estates or public spaces, but few have been successful in capturing this experience in their own home. Starting with a gorgeous handmade Oriental rug from Nejad Gallery is an excellent place to begin the process. In the case of this elegant formal living room our Tabriz Rug Design M023 with an all-over pattern in an opulent black background and soft gold border was chosen by the designer for both its impact as a beautiful piece of art and its rich color palette. Everything else in the room was chosen based on the rug making the selection process flow naturally and beautifully. The furniture’s richly textured chair and sofa fabrics were selected to perfectly complement the colors of the Tabriz Oriental rug. The simplicity of the coordinated window treatments exude class and elegance. The light beige wall color enlarges the space by reflecting light and is the perfect backdrop for hung art work and beautiful room appointments. The extremely talented interior designer created a memorable room that is a pleasure to enter and spend time in. Our expert staff at Nejad Gallery has over thirty years of experience working with top designers and architects from across the country. Whether you are working with a design professional or designing a space yourself, our talented Oriental rug specialists are here to assist you in the selection of the perfect rug for your home. Happy Rug Shopping! www.nejad.com

Modern Sectional Sofa Morelo by Seduta D'Arte. Italian sectional sofa Morelo is 100% made in Italy and successfully blends modern design, premium quality and great comfort. The adjustable headrests, this modern sofa is equipped with, make the Morelo sectional sofa ergonomic, providing with even better comfort. The sofa stand on durable metal base and is available upholstered either in soft Fabric, awesome looking Nubuck fabric or thick genuine Italian Leather, available in wide selection of colors. To add, Morelo is a modular sofa that can be ordered as a Sectional Sofa in a composition as shown, or be fully customized according to your dimensions, using a wide selection of modular pieces with which you can build your own composition, or even order it as a regular Sofa with Loveseat. Please contact our office to get necessary help with customization of this sectional sofa. MATERIAL/CONSTRUCTION: Wooden frame fitted with an elasticised webbing suspension, covered with stress resistant undeformable polyurethane foam Double density polyurethane foam and padding Can be upholstered in Fabric, Nubuck fabric or genuine Italian leather High and durable metal legs Backrests with adjustable headrests Modular sectional sofa that is also available as Sofa and Loveseat The starting price is for the Morelo Sectional Sofa W(128.5" x 92") Upholstered in Fabric. The shown composition (main image) consists of: 3-Seater with Arm (W84" Left) and Chaise Lounge (W44.5" x D92" Right). Dimensions: Sectional Sofa (as shown): W(128.5" x 92") x D44.5" x H26.8"/36.6" Sofa: W92" x D44.5" x H26.8"/36.6" Large Loveseat: W84.3" x D44.5" x H26.8"/36.6" Small Loveseat: W80.3" x D44.5" x H26.8"/36.6"

CertainTeed vinyl siding gave this Dartmouth, MA home loads of curb appeal! This homeowner eliminated the costly maintenance of painting every 5-7 years by choosing CertainTeed’s Restoration Classic vinyl siding in the color, Midnight Blue. Manufactured for both beauty and durability, this siding mimics the wood grain and shadow lines of painted, cedar clapboard siding. The realistic texture lines and fade-resistant colors make this siding an easy choice for homeowners who want to worry less and live more! CertainTeed, a leader in the vinyl siding industry, offers a gorgeous collection of colors that will suit your personal style. Whether you prefer deep colors, like Midnight Blue, or soft shades of gray and taupe – CertainTeed vinyl siding gives homeowners a lifetime of curb appeal. According to Remodeling Magazine’s 2020 Cost vs. Value report, vinyl siding offers a 74.7% return on investment. This means vinyl siding offers one of the highest returns when compared to other home remodeling projects. Thanks to our CertainTeed 5 Star Siding Contractor status, our customers know they are working with a company that is held to the highest industry standards. Since 1978, our family business has provided professional residential and construction services to thousands of Cape Cod, Southeastern Massachusetts, and Rhode Island homeowners. We have over 40 years of success in business and have been an Accredited, A+ Rated Member of the Better Business Bureau for over 25 years. Explore our online portfolio and extensive list of industry credentials and awards to see why many of your town neighbors have chosen Care Free Homes, Inc. as their preferred contractor. We ask for absolutely no money down and have financing options available for qualified homeowners. Get started on your siding, roofing, window, or construction project with a FREE quote! Call (508) 997-1111 or contact us online to schedule your consultation. Make your house a Care Free home!

With sweeping views of the Willamette river and Mt. Hood, this Atwater Place condo was designed with a balance of minimalism and livability in mind. A complete kitchen remodel brought a dark interior kitchen to the light and a full furnishings package welcomed Los Angeles transplants home to their new modern and bright residence. Our clients, a retired camera operator for both feature films and television and a producer/production manager on numerous television series including Weeds and The Middle, relocated from their traditionally-styled LA bungalow to Portland in the Summer of 2014. The couple sought a design departure from their long-term California residence and a fresh start for their new life in the South Waterfront. With only two pieces of sentimental furniture and a handful of artwork included in the plan, we set out to create a comfortable and clean-lined furnishings package complimenting the broad southeast views. Organically shaped upholstery pieces juxtaposed with angular steel and wood tables create a soft balance in the open floor plan. Several custom pieces, including a dining table designed by our studio and a custom hand-blown glass chandelier crafted by Scott Schiesel with Lightlite compliment timeless pieces from Knoll, Herman Miller, and B&B Italia. The kitchen is designed to reflect light and create brilliance in a space that is otherwise naturally dark. A material balance of stainless steel, back painted glass, quartz composite, lacquer, and mirror all play their part in creating a vibrant cooking environment. We collectively decided to forgo the traditional island pendant for a linear commercial fixture that provides tremendous light to the prep surface and creates an unexpected architectural element. The mirrored prep island creates the illusion of open space while concealing casework and wine storage on the working side of the kitchen. It is worth noting that this project was designed and installed almost entirely while our clients were still living in LA and wrapping up professional obligations and selling their home. This afforded us the tremendous opportunity to send our clients to showrooms not available in Portland to view key pieces before final specification. Textiles and finish samples were approved via mail and communication took place over e-mail, telephone, and an occasional office visit. This unique process lead to a successful result and a beautifully balanced living environment. Josh Partee Photography

Modern Sectional Sofa Morelo by Seduta D'Arte. Italian sectional sofa Morelo is 100% made in Italy and successfully blends modern design, premium quality and great comfort. The adjustable headrests, this modern sofa is equipped with, make the Morelo sectional sofa ergonomic, providing with even better comfort. The sofa stand on durable metal base and is available upholstered either in soft Fabric, awesome looking Nubuck fabric or thick genuine Italian Leather, available in wide selection of colors. To add, Morelo is a modular sofa that can be ordered as a Sectional Sofa in a composition as shown, or be fully customized according to your dimensions, using a wide selection of modular pieces with which you can build your own composition, or even order it as a regular Sofa with Loveseat. Please contact our office to get necessary help with customization of this sectional sofa. MATERIAL/CONSTRUCTION: Wooden frame fitted with an elasticised webbing suspension, covered with stress resistant undeformable polyurethane foam Double density polyurethane foam and padding Can be upholstered in Fabric, Nubuck fabric or genuine Italian leather High and durable metal legs Backrests with adjustable headrests Modular sectional sofa that is also available as Sofa and Loveseat The starting price is for the Morelo Sectional Sofa W(128.5" x 92") Upholstered in Fabric. The shown composition (main image) consists of: 3-Seater with Arm (W84" Left) and Chaise Lounge (W44.5" x D92" Right). Dimensions: Sectional Sofa (as shown): W(128.5" x 92") x D44.5" x H26.8"/36.6" Sofa: W92" x D44.5" x H26.8"/36.6" Large Loveseat: W84.3" x D44.5" x H26.8"/36.6" Small Loveseat: W80.3" x D44.5" x H26.8"/36.6"

Titan Wall Hood Design by Katrina Stumbos https://www.houzz.com/pro/katrina-stumbos/katrina-stumbos-interior-design