Conversion. This is a swimming pool that was converted into a koi pond. Filter system is a below- ground, sand filter placed on hillside. Spa is in the foreground. Water feature approximately 6' high. Features large granite boulders, weighing up to 1500 lbs each.

Close up of slow 'creek' with cascade and pond areas for koi in customer's back yard. Includes meandering gravel pathways and planted bed areas, as well as stone seat. Design by John DeVore

Ilsa Svendsen & Joseph Keller
Example of a mountain style home design design in New York

Design ideas for a rustic landscaping in Cleveland.

This is an example of a rustic landscaping in San Diego.

Minimalist home design photo in Miami

Ted J Greienr
Design ideas for a rustic landscaping in Bridgeport.

Rock waterfall and pond
Photo of a contemporary landscaping in Miami.

rock waterfall and pond in Jupiter Florida
Home design - tropical home design idea in Miami

Photo of a small contemporary partial sun backyard mulch water fountain landscape in Baltimore.

This is an example of a transitional stone water fountain landscape in Detroit.

Allan Schule
Photo of a large traditional backyard stone water fountain landscape in New York for spring.

virtuallyherestudios
Example of a trendy pool design in Orange County

This is the "Before" photo. Two separate ponds, neither of which worked properly. Landscape was overgrown and out of control. The space had become unmanageable for the property owner.

After two years of fighting with a failing pond liner, the resident decided to replace the liner in the pond. This 150’ x 115’pond sat above and flowed into a larger pond which was lined with PVC liner. We were replacing this with a 45 mil epdm fishsafe rubber liner. This presented a problem: there is no way to adhere the new rubber liner to the existing PVC liner in the lower pond. The solution was to pour a cement 18” wide x 2’ deep footing next to the wier damn between the two ponds in order to connect the two liners together. The old liner was placed on the top of the footing and a water-block sealant was used. The new rubber liner was placed on top and another layer of sealant along with stainless steel bars were laid atop the two materials in order to press them together to maintain a water-tight junction. A drain tile system was installed beneath the liner to relieve ground water pressure and vent off any gasses. Water tight seals also had to be provided for multiple plumbing penetrations through the liner. Non-woven geotextile planting media bags were used to prevent erosion around the perimeter of the pond. As the pond was landscaped with lawn and perennials, these had to be removed and preserved and maintained throughout the project in order to return them upon completion of the lining. All trenching work and removal of plant material was done by hand in order to maintain the surrounding landscape; great care was taken throughout the project in order to protect existing hard and softscape, so that upon completion, the area appeared almost exactly as it had been before work began. Photo by Larry Carnes

Large backyard kidney-shaped and concrete paver hot tub photo in Phoenix

Design ideas for a rustic landscaping in Montreal.