Instruction for set up/ assembly please

Thank you for your inquiry! Here's the assembly video of the original ::

https://www.youtube.com/watch?v=qoha06tzknY

Difference is that the wire is already threaded inside the wand. Put the hood on, push the metal sections of the wand together and screw the wand to the base through the back.

BEFORE SETTING UP LAMP: Please test wand prior to assembly.

Please insert bulb into lamp socket and plug in wand (prior to assembly). Press foot pad to ensure the wand is performing properly. One click should turn light on and one click should turn light off. If the light is not working please test another bulb and ensure the plug in you are using is working.

After you have confirmed the lamp wand is working; unplug the wand, remove the bulb, and perform the lamp assembly.

VERY IMPORTANT: When attaching wand to base, please use provided hook to pull the cord out of the way inside the metal housing. This will ensure wand cord is not damaged or cut during assembly.