Software
Houzz Logo Print
earthworm73

How to provide extra N for EB corn?

18 years ago

So I have 16 corn in an Earthbox. I have read on other forums that once corn gets knee high you should add a nitrogen based fert. Well mine are over a foot tall. How and what should I add to the water to give that extra shot of fert? And the blue stuff is out of the question according to EB.

Comments (6)

  • 18 years ago

    The good news is that corn really doesn't require that much N. Tissue analysis has shown that corn does best with a 1-.1-1 ratio which isn't all that different from any other plant.

    Corn is related to grass which is one reason many believe it has particularly high N needs, but it is pretty much on par with a whole bunch of other common plants in needing N and K and not much P, but a goodly amount of calcium.

    If you are following EB methodology and have had good results in the past from it with various plants, don't change anything and expect the same, good results.

  • 18 years ago

    justaguy,

    So for a container, would you be OK using Miracle-Grow (one tablespoon mixed in a quart of water) and then pouring this down the filler tube to disperse into the water reservoir? It is 20-20-20, and I just have a lot of it on hand. Also, what frequency (weekly, monthly?) would you add it in?

    Raybo

  • 18 years ago

    Unless you will periodically flush the growing mix, you will probably want to stay away from full strength in the reservoir.

    In the past I have fertilized full strength in SWC and not had any problem, but I didn't add to the reservoir, just to the planting mix itself.

    Don't take this as expert advice as I have never fertilized the way you are thinking of (not that it is a bad idea), but I think what I would do is make up a full strength gallon and add it to the reservoir such that it was at 1/8th strength. If your reservoir holds 4 gallons, then add 1/2 gallon to it at full strength. I would probably repeat this each time the reservoir needed refilling. Unlike a traditional container, the fertilizer isn't going to drain out so go easy on it.

  • 18 years ago

    justaguy,

    Yes, that is was I was planning to do. Add 1 tablespoon in a quart watering can, shaking it around to get full dispersion, then pouring it into my 10 gallon filled reservoir down the tube. So it should then spread through the reservoir. The wicking should then pull it upward to the roots, rather than convention top spreading and watering, to seep it down into the root system.

    My only uncertainty is how frequently to do this process. The corn is now 65" tall and the tassels are about to appear, so this should be prime demand time on the fertilizer. Looking for suggestions....

    Raybo

  • 18 years ago

    And I think fish emulsion is out of the question cuz I think I read it will sink to the bottom before the soil hasa chance to wick it up.

  • 18 years ago

    I just add my own home made Nitrogen ;)