Get this pond DONE already!

13 years ago

This is the summer I finally finish my pond but just have a few questions...

Do skimmers necessarily need to be installed outside of the pond liner - if I found a way to secure it in a stack of rocks at the right height in a corner of my pond wouldnÃ¢ÂÂt that work? I could fill in the gaps around the rocks with black foam. Obviously IÃ¢ÂÂd lose some pond area but is there any other reason why not to do this?

I thought of a way of installing it outside the liner but then the outflow hose would be outside the liner to return the water to waterfall area. I had a hose burst recently for no apparent reason, so I would not want a hose going outside the liner. Does anything flexible exist that would be more durable and not deteriorate if it is in the ground? I just havent found much info about the plumbing aspect of ponds online any tips you might want to share about that, what exactly to use pvc pipes? But then those have glued connections wouldnÃ¢ÂÂt you have to worry about the ground freezing/thawing/shifting.

Also... I need some kind of circulation at the bottom of the pond. I thought of having a second pump or retrofit drain down there to pull water up and into the waterfall but what about just diverting some of the outflow from skimmer down to the bottom - would that be enough to push the debris back up and (hopefully) into the skimmer? Or would the muck just cloud up the pond and float around without going into the filter.

Pond capacity = 800 gallons, the pump would be either a 1800 gph in the skimmer + 1200 at the bottom OR one 2600 in the skimmer. Distance from pump to waterfall head = 10 feet at most.

Sort by:Oldest

Comments (4)

jeff_in_wi
13 years ago
I assume you are unsure about cutting holes in your liner. Cutting a hole or two is no big deal - but if you are not comfortable with it - you could probably install the skimmer inside the liner. You probably need to weight it down with a couple rocks or it will float. Like you said; you have to find a way to route the piping. I would recommend flexible PVC in the 1.5" to 2" diameter in your flow rate. It is very heavy duty and can withstand our winters.
I am in Green Bay if you are near there.
Jeff
cherokee_joeshoeboot
13 years ago
It is possible to install the skimmer inside the liner but not desirable. As Jeff stated,one problem is that they will float. This is especially true if you have filter pads above the pump area. I tried this once and even put solid landscape blocks in the bottom and it still floated. Another problem with in pond skimmer is that some of the floating debris will collect around and behind the skimmer box.

As Jeff mentioned you should be using PVC and it is designed to be buried in the ground. They make a flexible PVC that works fine and I use it for all my pond plumbing which uses 1 1/2" or smaller pipes. If you decide to use that and have to use any fittings I advise you to use electrical PVC fittings instead of the normal white fittings. Properly glued PVC fittings will withstand the normal shifting caused by freezing and thawing.

One thing that I'm not clear about is what you have in the pond. Is it a water garden with just plants or do you have fish as well? With respect to circulation at the bottom of the pond, if you want to do this to keep the bottom clean you may be successful but the result will be cloudy water. Skimmers are not designed to handle the stuff that sinks to the bottom of the pond (fish poo decaying plant material and mulm) they are designed to collect the stuff that floats. You should have some other kind of filtration to deal with the sinking stuff. When the bottom stuff gets pulled into the skimmer and goes through the pump it gets ground up to finer and finer particles and if you don't have a filter to remove it the it just circulates around your pond and the water gets more and more cloudy. Does your waterfall have any kind of filter?

Hope this helps.
Related Professionals
Knoxville Landscape Architects & Landscape Designers · Fort Dodge Landscape Architects & Landscape Designers · Palm Desert Landscape Architects & Landscape Designers · Lubbock Landscape Architects & Landscape Designers · Davenport Landscape Contractors · South Bend Landscape Contractors · Bismarck Landscape Contractors · Waycross Design-Build Firms · Hays Design-Build Firms · Springfield Design-Build Firms · Toms River Design-Build Firms · Janesville Design-Build Firms · Grand Junction Design-Build Firms · Roswell Design-Build Firms · Dickinson Design-Build Firms
Debbie Downer
Original Author
13 years ago
THANK U!!! Yes that is very helpful - guide books leave out the plumbing entirely and I could spend hours.... in fact I have... going online trying to figure it all out. It helps to know what the name of the thing is I want to get!

What I want to find now is some kind of fitting to connect two parts of a hose so they screw together like a garden hose onto a faucet - does such a thing exist? And what is that thing called?
jeff_in_wi
13 years ago
Yes - it is called a "Union" and Fleet Farm carries them. Menard's and Home Depot probably have them as well.

Jeff