which bark is best?

12 years ago

Hi,
I need some help figuring out which bark would be best for my plants. I am planning on using the bark in some gritty mix, 5-1-1, and as a soil amendment in some large fabric raised beds.
My choices are the 1/4 minus fir bark pictured on the left or the fine redwood amendment pictured on the right. I didn't have a coin handy, but both seemed uniform and most pieces 1/4 inch and under). I am mainly concerned about the amount of sapwood in the bark. I know that fir bark is highly recommended over redwood on the gardenweb forums, but does this fir bark in the picture have too much sapwood? Would I be better off using the redwood?

Also the description of the redwood fines is interesting:
"Ground up redwood, which is a byproduct of the lumber mills, has been stabilized with nitrogen instead of composted."

Is this nitrogen stabilization a good thing or is it something to steer clear of?
Which bark will make my plants healthier and happier?

Thanks for your help!
Robin

This post was edited by robinlmorris on Wed, Mar 26, 14 at 4:15

Sort by:Oldest

Comments (6)

toxcrusadr
12 years ago
I have never heard of 'nitrogen stabilization' of bark. I would be interested in hearing more about that.

EDIT: A little Googling finds various references to 'nitrogen-stabilized' wood chips. Perhaps this is some kind of treatment that prevents them from robbing nitrogen from the soil? I am curious how that is done.

I'm no expert on gritty mix so I'll let others chime in on that. There was a thread here not long ago about this same topic (what size of bark to use).

This post was edited by toxcrusadr on Wed, Mar 26, 14 at 11:38
Miguelovic
12 years ago
"EDIT: A little Googling finds various references to 'nitrogen-stabilized' wood chips. Perhaps this is some kind of treatment that prevents them from robbing nitrogen from the soil? I am curious how that is done. "

Correct. Sulfate of ammonia is added to bring the C:N ratio to 50:1.

http://patwelsh.com/wpmu/blog/trees/chipped-eucalyptus-wood-and-leaves-from-tree-trimmers/

No idea on the gritty/5-1-1 questions, just started looking into it myself :)
Related Professionals
Lafayette Landscape Architects & Landscape Designers · College Station Landscape Architects & Landscape Designers · San Antonio Landscape Architects & Landscape Designers · Olympia Landscape Architects & Landscape Designers · Evanston Landscape Architects & Landscape Designers · Paducah Landscape Contractors · Tuscaloosa Landscape Contractors · Quincy Landscape Contractors · Ashland Landscape Contractors · Beaumont Landscape Contractors · Frisco Landscape Contractors · Waco Landscape Contractors · Sioux Falls Landscape Contractors · Philadelphia Stone, Pavers & Concrete · Stamford Stone, Pavers & Concrete
User
12 years ago
Not sure how much you need but this is one I've used, same as Raybo (rnewste on GardenWeb) uses for EarthTainers.

Here is a link that might be useful: Earthgro Decorative Groundcover Bark
Robin Morris
Original Author
12 years ago
Thanks art_1
It doesn't say what kind of wood it is; also one of the reviewers on the site says the pieces are sometimes 3/4 inch or bigger... if that is the case, do you sift out the large pieces?
Unless someone can give me a reason not to, I may just try the redwood since it is so popular where I live... and the added nitrogen may even help the plants.
It is also only $33/yd which makes it super affordable.
Thanks,
Robin
Kimmsr
12 years ago
Use what is most readily available and the least cost where you are.
User
12 years ago
I have used it right out of the bag but yes you would have to screen it to get a uniform size. I am not sure how much better it would perform if you screened it.

You could see how much is useable if you decide to screen the bagged or bulk bark, or you could just try one and see how it goes.