My Dad just found 2 Montgomery Ward Garden Mark Lawnmowers with 4hp B&S motor. One is completely in tact, although not running. The other is missing a few parts... Know who might be interested in something like this? Or where I can get more info about them? the model number is TM020A.

looking for configuration for belts (two) on Gilson tiller old MW. forward reverse ?

I need two belts for a Gilson Tiller. The model # is 5118248247. I also need a phamplet to tell how to replace them.

I received a request from Superhog for a rear tine manual. I have no way of replying to you. Please provide an email and I will forward

i need info on old montgomery ward tiller model 39032d i need to reinstall belts and not sure how to i would like any help if possable thanks brad

Hi,
I have a tiller Mont Ward model GIL-39007A. The problem is that I put apart the Idller arm assembly and link and now when I assmbled it the link seems too short even with belts off.Everything seems in place but stiil the link seems short by two and one half inches.
Any help is greatly appreciated.I can send pictures.
Thanks so much.Mslelo

Here is a link that might be useful: old montgomery ward tiller

GIL 39032D tiller parting out anyone interested? jake
112jdw@gmail.com i am in oregon
oh and lawn boy will send anyone a manual for gilson
brothers products for free (shows belt routing and adjustments)while you have them on the phone ask them for the belt part numbers as they have changed from the originals.

I have an old Firestone front tine tiller (not sure who made it) with forward/reverse that has a verticle shaft 5hp B&S engine. I need to know how the belt (s) are routed to get the forward & reverse to work. Can someone help with a diagram or instructions? I know the belt in the picture is not right. It was this way when I bought it. Belt numbers would also be helpful. I can post my email address if needed. Thank you