My builder uses Houzz Pro to plan the timeline and give detailed estimates and daily updates with photos of progress, and provide invoices at pre-agreed key points in the build. This made the whole experience much more efficient and stress-free.
This machine bogs down under power and load. It idles and starts good, but will not work under power. I have removed and cleaned the carb and checked for air leaks and reassembled everything, but still no change. Any ideas?
Check the spark arrestor screen in the muffler, filter in tank and make sure you didn't overlook the small screen in the inlet side of the carb. Make sure the carb diaphram is good. It can appear normal and be stiff.
I have replaced the carb kit and experienced no change. It still will not run under load.. Just bogs down and dies. I am about ready to deep six it. Andy
ray_okla
andy_2008Original Author
Related Professionals
Westminster Landscape Architects & Landscape Designers · Florence Landscape Architects & Landscape Designers · Knoxville Landscape Architects & Landscape Designers · Torrington Landscape Architects & Landscape Designers · Monroe Landscape Architects & Landscape Designers · Grand Junction Landscape Architects & Landscape Designers · Ocala Landscape Contractors · Brunswick Landscape Contractors · Lima Landscape Contractors · Amarillo Landscape Contractors · San Angelo Landscape Contractors · Eugene Landscape Contractors · McComb Tile and Stone Contractors · Vicksburg Tile and Stone Contractors · Rochester Tile and Stone Contractorsray_okla
andy_2008Original Author
ladylake