Stihl 015L chainsaw

14 years ago

I just bought an old Stihl 015L chainsaw for use around my yard. The engine runs very well, but I've had to fix a few items as was expected. The chain oiler wasn't working so I took the whole oil pump/tubing assembly apart and blew the crud out of the rubber tubes and now it works fine. Somehow I managed to strip the threads on the nut that holds the clutch assembly to the driveshaft. The carrier that is stripped is part no. 1116 162 0800. Does anyone have one of these or know where I can buy one off the internet? I have not tried the Stihl dealer but from the comments on-line it sounds like parts are no longer available from Stihl. Is there an alternate clutch assembly that will work on this saw?

Thanks for your help

Sort by:Oldest

Comments (7)

loger_gw
14 years ago
Please send a pic of the needed part showing it in-place where it fits. Is it a left hand thread or unknown thread or etc before I see the Pic?
User
14 years ago
Here's a link to a parts site I picked up on this forum some time ago. It's not an easy site to use. You might try doing a Google advanced search on the site with the part number you have as a place to start.

Here is a link that might be useful: Chainsawr
Related Professionals
Newark Landscape Architects & Landscape Designers · Kenosha Landscape Architects & Landscape Designers · Victoria Landscape Architects & Landscape Designers · Daytona Beach Landscape Contractors · Corpus Christi Landscape Contractors · Bemidji Landscape Contractors · Clearlake Landscape Contractors · Waycross Tile and Stone Contractors · Shreveport Tile and Stone Contractors · Kansas City Tile and Stone Contractors · Chillicothe Tile and Stone Contractors · Ithaca Tile and Stone Contractors · Pueblo Tile and Stone Contractors · Farmington Tile and Stone Contractors · Casper Tile and Stone Contractors
User
14 years ago
Had a little more time to look myself this morning and looks like Chainsawr is sold out on your part. Maybe someone else can direct you to an online source. I sure wouldn't overlook the local Stihl dealers though.
loger_gw
14 years ago
Did anyone see a link/Pic to the part needed? Is it something a Machine Shop or individuals can repair with Heli-Coils or inserts?
andyma_gw
14 years ago
Uhhmm, If I remember right, that is a left handed nut. The threads on the crank shaft are pretty big. At least they are on my 041 Farmboss. I would go to a shop and see if they can get you a few of the proper size nuts. Check the threads for burrs and such. Remove the burrs gently with a 3 corner file.
PatSea
Original Author
14 years ago
I was able to buy a used clutch on Ebay for less than $10 and it works fine. Thanks to all for your help.
ewalk
13 years ago
If Scott at the chainsawr site is out of stock and Ebay is a no go then any local Machine shop can usually reverse engineer these parts also at a nominal charge .