Software
Houzz Logo Print
chasingcenturies

My new ticky-tack shade structure

PVC, PVC Clips and 50% Aluminet. It isn't much to look at, but provides me with a spot to get pups and bare-root plants off to a good start. As it was, I was moving little potted plants around all over my property as conditions dictated, i.e. good spot in spring was too exposed in summer. Inexpensive and easy as pie if anyone here has a similar need.

Comments (24)

  • 13 years ago

    I usually start pups in the enclosed garage of a friend

  • 13 years ago

    I think it looks great and will provide a great area to get plants started. Awesome!

  • 13 years ago

    I built this several years ago as a "portable" greenhouse for summer use. I don't get good sun in my permanent greenhouse so I decided to build this protective structure that is easily disassembled and stored in the garage over the winter months. The mistake I made was not using at least 3/4" or 1" PVC. As mentioned the cost isn't too much and the project is major easy! It's like "Lego's" for adults and you can make it as large as you want, easily add on units and design different shapes, too. I have covered mine with simple 4 mil plastic, because I want as much light as possible and you can purchase 100' rolls for very little. The black clips are irrigation pipe. I use my saw and cut through one side so they will "clip" onto the PVC.

    This post was edited by bikerdoc5968 on Tue, Jun 11, 13 at 8:51

  • 13 years ago

    So in your case, it's to help keep them dry? Looks very nice!

  • 13 years ago

    by GermanStar
    So in your case, it's to help keep them dry?

    Well in the case of Howard's Cattleyas (further back behind the cacti) it's more to give them far more light than his greenhouse receives but light intensity short of full sun.

    But for his cacti that want more light but not all the possible rainwater, yes it does keep them dry.

  • 13 years ago

    Thanks Paul... a much better account of the situation!

  • 13 years ago

    Nice job on both! I love PVC. It's so fun and easy to use that it's almost sad when you're finished.

    Here's what's been keeping me busy.

  • 13 years ago

    What's next, a guest house? ;-)

  • 13 years ago

    Very nice Ryan. I saw plans for something similar that use 1" x 12" PVC pounded into the ground and 3/4" x 10' inserted into these pieces and joined at the top with 4-way. The 10' pieces were cut at 5' to insert a 4-way connecter to tie the ribs together. This was covered in 6 mil plastic.

  • 13 years ago

    Haha, that IS the guest house!

    Howard, that sounds interesting. The idea with this is that it can come with me when I move. Once the whole thing is tied to the tables it becomes very stable.

  • 13 years ago

    Ryan, that's part of the problem I have with my structure and that it is 1/2" PVC. I have to place weights on the bottom cross members to keep it up. It would also help if I screwed some of the pieces to one another. In the fall I leave the "house" looking pieces intact and just remove the horizontal members... makes for easy assembly in the spring. Just wish I would have used 3/4" PVC.

  • 13 years ago

    That's my concern as well. It's relatively small (6' x 2' x 2') and completely open on two sides, but monsoon season will be here soon, and I'm guessing my little shade structure will go airborne at some point, possibly damaging the very plants it's designed to protect. It's about 6"- 8" from a wrought iron fence, so the plan is to attach it somehow, possibly with zip ties.

  • 13 years ago

    Something else, Germanstar, you might want to consider. You have a flat roof design. I don't know how much rainfall you receive but water can get very heavy and your roof will cave in unloading a major flood on the plants below. You can easily modify your design with 2 connectors and 2 pieces of the same size PVC to raise the front a few inches higher than the back.

  • 13 years ago

    GS lives in Arizona, I don't think rain is a huge concern. There are holes in his shade cover.

    On another note, I have frost cover structures in my Vegetable garden. I use the 1" manuscript clips that one gets by the dozen for $6 from Office Max or Staples. They work great to clip the fabric to the 3/4" PVC poles. and are VERY cheap.

  • 13 years ago

    I know, Mara. I realized after I posted how brain dead my comment was. i was thinking of my setup. Duh!

  • 13 years ago

    GS, a few sandbags would keep that from blowing away.

  • 13 years ago

    @ wantonamara: The 4" long clips I bought are specifically designed to attach fabric to PVC @ $0.45 each.

  • 13 years ago

    All very neat ideas, guys!! With emphasis on how economical these can be done & your instructions...makes me think I could make one! Now, to figure where it could be strategically placed to avoid its demise (not in the dog's racetrack, places they wouldn't try to jump over the shelves/tables, etc.) Putting on my thinking cap!! I cannot keep moving lots of pots from top of the washing machine to outside & back before burning!

  • 13 years ago

    Just pick up stock PVC at a local store and order specialty items here. This is where I found the clamps

    Here is a link that might be useful: FlexPVC.com

  • 13 years ago

    Nice clamps GS. I like your site too.

    I like my manuscript clamps because they have these handles on them make them easy to put on and off in the middle of the night with the wind blowing when the big cold front blows in. They work clipping fabic to fabric or fabric to welded wire utility panel. I use those darn things for a host of reasons in my wood shop so I have lots on hand.

  • 13 years ago

    Wow...you guys are so efficient and creative. Great job everyone!!

    " The black clips are irrigation pipe. I use my saw and cut through one side so they will "clip" onto the PVC."

    Bikerdoc, that is such a great idea and will have to use it the next time I have to cover my Mango trees during a freeze. Thanks!!

  • 13 years ago

    Nancy, PVC irrigation tubing is sold in 50' coils and comes in 2 sizes. You can cut it with a utility knife but I find my table saw works better. It may be cheaper to go to the link mentioned earlier in this thread and purchase the size you want. I just happened to have the tubing on hand.

  • 13 years ago

    this is my not so cheap shelter from the monsoons we get (10" in one week). It is 16' long and 4' wide. Already i want to modify it by making more than 4' front to back because of the wind blowing the rain in. The roof is sloping but it is hard to see in this pix. Also it is attached to the fence to keep it steady.

    {{gwi:570604}}

  • 13 years ago

    Thanks Bikerdoc!!

    Laura that's a very nice set up you have and what a great collection! Love you bonsai tree, very pretty!!