Software
Houzz Logo Print
ivyskies9

Would love to replicate this hot tub

14 years ago
What's the name of it and how do you get to the access panels? Thanks!
Hot Tub · More Info

Comments (13)

  • PRO
    12 years ago
    Great Design! Does this sit on a slab or direct on the ground? Do you have any special drainage in place? We would want to do something similar in our California Residence.
  • 12 years ago
    I'm putting in a similar Sundance Spa but was told I need to leave one side open for retractable spa cover to fold back on. How did you handle the spa cover or so they manually take on and off?
  • PRO
    12 years ago
    This sat on a slab.

    We left a wide enough deck ledge to hold the cover, we did not use the lid lift mechanism . In this shot we removed the cover altogether.
  • 12 years ago
    Looks like you sank the spa about 18". How much clearance between spa and retaining walls did you maintain? I'm assuming pressure treated wood retaining. Thanks.
  • PRO
    12 years ago
    Yes we retained with pressure treated wood. We kept minimal distance. The access panel to the motor was on the exposed down sloping side.
  • 12 years ago
    this is fantastic!
  • PRO
    12 years ago
    How far in the ground was the hottub? Did you pour a concrete slab?
  • PRO
    12 years ago
    This was on a down sloping site. The near edge was cut in about 18" while the far edge is at ground level. We did pour a slab due to the weight of the tub.
  • 11 years ago
    How do you put a cover on the jacuzzi if the wood deck is flush with the top of the jacuzzi?
  • 6 years ago

    Looking to do this concept and have the same question as above. Love the reduced lip aesthetic but how do you decide the cover when not in use?

  • 6 years ago
    <?xml version="1.0" encoding="UTF-8"?><md>*secure
  • 6 years ago

    *secure the cover