Software
Houzz Logo Print
snappybob

Pressure canner turned black

16 years ago

I pickled some okra this afternoon using my Presto pressure canner as a BWB. When I opened it up I saw that the bottom of the inside up to about two innches up the sides had turned black. What would make an aluminum pan like this turn black like it did?

Comments (6)

  • 16 years ago

    Ater looking at my jars I think there must have been some siphoning be cause I now have about 1 inch head space instead of 1/2 inch. I guess the vinegar caused the blackening. My question now is, are they going to be OK? should I top them off and reprocess, throw them away?

  • 16 years ago

    That happens with aluminum and acid foods. Your pickles should be fine, since they were in jars, and the flow of the liquid was from the jars TO the pan, not the other way around.

    Hopefully, you pan will clean up OK. I think you can rub it with a scrubbing pad with some Kosher salt and it should remove the black discoloration. Or, maybe it's a lemon half and salt.

  • 16 years ago

    Mine is permanently stained like that.Just from minerals in the water, etc. Not an issue. I would not worry about it.

  • 16 years ago

    Actually, vinegar can help prevent staining. In fact, I always put a little vinegar in my canner with the water, so as Linda_Lou said, it's likely the water is the culprit.

    It's harmless. It depends on how much it bothers you and whether you want to remove it or live with it. Boiling a little white vinegar-water solution will help. Or use cream of tartar - water. Either one is fine.

    You might have had siphoning or it may be that your okra just absorbed a certain amount of the pickling solution. If the water in the canner smells like the brine, then yes, there was siphoning.

    Carol

  • 16 years ago

    Thanks for all of your responses. I agree, it may have been just that the Okra soaked up some of the brine in the jar. I'm just glad I didn't have to toss them. I'll let them sit for about a month and let you all know how they turned out.

  • 4 years ago
    last modified: 4 years ago

    Preface: I'm new to pressure canning and got a used 23qt Presto. Some dark stains to the fill line and aluminum canning rack were already there. I canned some pork. I went to fill line with tap water and 1 TBS white vinegar. There was no apparent siphoning, but the canner and rack were pretty black. Humm? I used some citric acid granules and scrubbed a bit...still black. I had ordered a 5, 10 15, pressure regulator that came yesterday after my pork canning and tedious monitoring of the 15psi regulator that came with the canner. SO. I added some water and 1 to 2TBS of citric acid granules to the water, heated, vented, and put new adjustable regulator to the 1 added ring - 10psi. I got to pressure - about 11-12psi and adjusted heat. SO EASY! Pressure maintained and after about 15 to 20 minutes the heat was shut off. The new regulator is a game-changer. After cooling, I opened the canner, and magic had happened. What was black was now pristine grey.