Software
Houzz Logo Print
gyna78

Staking System for homemade Tomato boxes?

19 years ago

Hello,

I am new to homemade tupperware earthboxes (made my first 18 gal. last week) and plan to try some tomatoes this year. My box will be on my balcony. I live in a townhouse community and need a aestecally-pleasing staking solution. I have seen PVC staking system online and that won't work out.

I don't plan to prune.. much..

Can I use a Tomato cage (rectanglar) that can go directly into the Earthbox's mix? or does External systems work the best? I can secure the cage to the railings of my balcony for added support, but the useful part of the railings only go to about 30".

Does anyone have any pictures of their staking systems using homemade eartnboxes??

Comments (2)

  • 19 years ago

    gyna

    If you have indeterminate tomatoes, you'll need a very sturdy support for the plants -- mine grew 10' tall in "earthbuckets", and I used cattle panels for supports. There are some very good determinate tomatoes that don't grow nearly as tall, more like 3-4' bushes than vines. Have you decided yet what kinds of tomatoes you want to grow?

    Tomato cages in your earthboxes that are also attached to your railing should work fine with determinates that don't grow overly-tall. Just remember that determinate tomatoes produce all their fruit in about a two-week span of time. Once they begin producing tomatoes, the plants don't continue to grow like the indeterminates. If you start them from seeds, you can start them in "batches" 2-3 weeks apart and have a longer season of tomatoes.

    Here's a good discussion of the difference between the two plant structures.

    This year I decided to grow the determinate, Rutgers VFA, that I purchased from Tomato Growers Supply and pray that they don't grow much larger than four feet! Some advertised Rutgers tomatoes are indeterminates, but these are the bush-type.

    Below are discussions about determinates that people have grown and like. Many of the posts mention growing them in earthboxes.

    Here is a link that might be useful: Garden Web determinate tomato discussions

  • 19 years ago

    I have made the best cage for tomatoes in Earthboxes that I have seen so far. As far as asthetics, well no good cage will be overly attractive. Take fence wire that is about 4 feet tall. My Earthboxes measure 32 inches long and 14 inches wide. The cage will fit the older boxes as well as the newer boxes with casters. The only difference is you will need to cut some of the wire and slip the finished cage over the wheels. First, make a base out of the wire that is two inches on each side longer than the Earthbox. Cut your fence wire to about 36inches by 14 inches. This will go under the Earthbox. Then take a section of fence wire that is 92 inches wide by 48 inches wide(this is the height of the fencing material, if you buy it at a store such as Lowe's). You will fold the fencing so that the first section is 32 inches, then the second fold will be 14 inches, the 3rd will be 32 inches and the fourth side is again 14 inches. It will take some folding and bending, but you will have a rectangular cage that you either get some low gauge wire to attach the two end sides together, or if you plan it out when you cut your section, you can have long wires left on the end of each cut that can be used later for this purpose. One note of caution. The wire is very sharp, and will cut and poke your hands and anything else if you are not careful. Wear gloves and eye protection. As you work with the wire, be careful as it can spring back and hit you. Ok, take the first rectangular section and slide it over the Earthbox and attach it to the base. I have found that the tomato plants grow very high, so I have made a second section just like the first rectangular section and placed it inside on the top of the first section. I then wire the two together forming an 8 foot tall cage that will not have any problem containing two tall tomato plants. The final step is to cut the wire grids so you can get your hands inside to pick tomatoes, or to put a hose inside to fill the spout (I have a completely automated system using an irrigation timer box, automatic valves, with Mister Mister black hose going into each box and I set the timer for one minute for each box). I would recommend grinding and smoothing the cut ends where your hands will go thru, as the cut ends are sharp and will cut or scratch you. It will take a couple of hours to make a cage like I have described, but once made, it will last forever. The only thing to remember, is that next year, you will have to undo the wire that connects it to the base, so you can remove the cage to work on your Earthbox and replant it.