Software
Houzz Logo Print
deegeegirl

Help - our Bluestar grill has stopped working!

17 years ago

Hi all,

I had planned to grill some sirloin tips tonight. I turned on the grill to preheat about 10 minutes and also started the fan at the same time. Several minutes later I realized the grill hadn't lit. I usually watch for the light of the ignition and then watch for the blue flame but was doing some food prep and didn't this time. So, I was surprised when I saw it wasn't lit. Turned it off and tried again. Nothing. I last used the grill about a week or so ago. No problems. Before that last time, I had relined the grill box with clean foil, put everything back in place and it worked just fine, like always.

I looked in the manual but there doesn't seem to be a trouble shooting section about this. Any ideas about what could be wrong?

Also, between the time I turned it on and the time I realized the flame hadn't lit, about 7 or 8 minutes went by. Do you think gas was coming out that whole time? I didn't smell gas and I didn't hear it (turned the fan off to make sure) but I'm unsure if there was unlit gas coming into our house for several minutes. If that were the case, would the fan have pulled most of it out?

I've also noticed that part of the piece of metal above the ignitor has turned a red-orange color over time and when I wipe it, a reddish powder comes off. Is that normal?

Any ideas are most welcome. Thanks in advance.

Comments (4)