Software
Houzz Logo Print
hzdeleted_10471126

My Appliances Today.... help.. :(

18 years ago

I usually hang out over in the decorating forum but thought maybe someone here could shed some light...

Appliances came today. You'd think i'd be happy.

The biggest issue of the day is my refrigerator. It's a white Maytag. Freezer on bottom. Single door. It's like 22.5 cu ft. (i think. it's not a 25)

It's huge. Just looks ridiculous! My countertops are 25in. The fridge is 30 just to the door part! Add the rest on there and the depth is 34 1/4". Looks horribly out of place.

We're building this house. Didn't find this forum until after building process had started. I should have enclosed the frigde yadda ya. I didn't and there's not too much i can do about that now but i never expected it to stick out that far. I figured it was all standard and just wouldn't look like that. Keep in mind, i never lived out on my own...never had to buy an appliance before....

I called the appliance place tonight (local people) he told me that depth is standard but i could come pick something else out if i wanted. It's going to cost me for them to take out and reinstall another one.

So my main question here is...is the size normal? Anyone else have a fridge that sticks out that far?? It just looks huge. Wouldn't probably look as bad if the fridge were on the end but there's countertop on both sides. I was literally in tears earlier over this. I took pics tonight but won't be able to post them until tomorrow. (dial up)

And of course DH thinks it's fine and that i'm just being picky. We're suppose to go tomorrow night and look at different fridges. I really don't want a small old school looking refrigerator.

Thoughts please?

Comments (4)

  • 18 years ago

    The size is normal. It sounds like you already have 25" deep counters on both sides and can't make them deeper (can you?), but you still have options:
    1) Get a counter-depth fridge -- there are many.
    Or...
    2) If the wall is an interior wall and you don't have plumbing pipes behind the fridge, you can recess the fridge into the wall. This is not hard to do, it's really just a bit of reframing and a piece of plywood. Normally this will get you an additional 3" - 3 1/2". I am doing this in my own kitchen and have done it in others (I'm a KD). Depending on what's behind the wall you may even be able to steal a few inches from the other side.

  • 18 years ago

    If you Google a search term like counter-depth refrigerator, it should display lots of choices. All the major appliance manufacturers make counter depth refrigerators. But watch out for the height. The counter depth units tend to be taller to compensate for the loss in depth.

    I think selecting a counter depth unit that fits will be less disruptive than knocking down the wall and recessing the unit you now have. From now on, measure everything carefully before commiting to a purchase.

  • 18 years ago

    Just an fyi - a counterdepth fridge will not be flush with your counters - the door still extends beyond the counters - only built-in fridges can be made flush with the counters

  • 18 years ago

    I'm not sure yet what i'm going to do. DH really isn't into getting a smaller refrigerator. Not to mention we'll get charged for the removal/new installation. I discovered last night that we had actually asked for the 21.9. They bought and installed a 25.1. We paid the price of the 21. I'm assuming this was a mess up. The depth difference is only 1". The 21 would've obviously been shorter on the sides and top. There's a laundry room behind the refrigerator. Can't take the space from there as it's already not real big.
    Ellene613 - they had to installed an icemaker thing when they installed the frige because we didn't have one (oops) so i don't know if that would interfer with the little remodel.
    This morning i was leaning towards just keeping it because it has a lot more room for 'storage'...still looks hunky though. Maybe once I'm able to live there and accessorize it won't look as bad..