Software
Houzz Logo Print
michsully

furnace not going to set temperature

17 years ago

hi, I noticed that the furnace is not going to the desired temp this morning. We are in Chicago and it is cold but should not the furnace reach the temp set on the thermostadt? It is a 15 year old gas york that has worked fine until now. Is this just something with the zero temperature outside or is something broke?

Comments (5)

  • 17 years ago

    If the outdoor temp is much colder than usual, your house will lose heat faster than the system can replace it. This is normal. Heating (and cooling) systems are sized to maintain a certain indoor temp under a specific "normal" range of load conditions. At extremes, they slip behind.

  • 17 years ago

    thanks, then maybe I will wait until it gets back above zero for a few days and see what happens before I call in a heat man

  • 17 years ago

    If it has always gone to the set temp in the past..... even when it has been this cold, then something has changed.
    Is your filter dirty?
    Have you changed to a new type of filter that may be to restrictive?
    Has anyone been in the attic and disturbed (moved) some insulation for any reason (like installing recessed lighting or exhaust fans?)
    Has any major work been done to the home?
    Has any dampers been closed (or opened if they were closed all along)?
    Has any registers been closed by accident while cleaning?
    Any furniture been re-arrganged to block vents?
    Has the desired temperature been increased? You indicate it has always hit the desired temp in the past (maybe it was a few degrees lower back then.....don't know about you but I like it warmer the older I get.)
    Anything sound different on the furnace?
    etc?

    Key1

  • 17 years ago

    Key1, the only thing that could possibbly account for a change would be xmas tree boxes in front of the unit. There were boxes up against the furnace that I moved after I noticed the colder temps inside the house. Maybe one of them blocked the vents on the front of the unit?

  • 17 years ago

    If you have a major return vent in front of the furnace that was blocked.....that could do it. The key is good airflow. Did moving the box solve the problem?
    Key1