Software
Houzz Logo Print
ksblase

losing sleep over a floor!

12 years ago

Hi all,
I am losing sleep over getting our floors redone. It is such a big job and I have read and reread lots of posts and am just getting more confused. Such conflicting opinions!
We are in the process of getting our floors refinished in the kitchen, dining room, hall and living room. They are Brazilian Cherry that were quite damaged by the previous owners. It is over 1100 sq ft and I was going to do a Swedish Finish by Synteko. I wanted a a matte to satin Finish , but Synteko's website showed only Satin finish or glossier. The floor installer brought a sample of the finish which was a little shinier than I wanted, but close. He also brought along a waterborne finish by Pallmann that he uses. (I believe it is the X-96). We really liked the the look of the finish and he also said that this finish might not darken the Brazilian Cherry as much.

I am torn because we want durability in the kitchen floor and I am not familiar with this brand. We have no kids or dogs, but water is always falling on the floor! The floor is connected to all the rooms we are doing, so I doubt I could just refinish the kitchen without doing the whole floor again.
Pallmann also offers a X98 which is more commercial although the X-96 is rated by the company as light industrial.
Has anyone used this product (it's from Europe, has been around a long time there)? Have water borne products improved that durability is as good as a Swedish finish? Can they really keep the Brazilian Cherry from darkening as much as the Swedish finish?

Thanks
Karen

Comments (6)

  • 12 years ago

    I might be insane, but using a water based sealer, you might want to make sure there are more than a few coats for durability.

    I know when I do things with polyacrylic (water based, vs. polyurethane, solvent based, clean-up with mineral spirits) I always have to put on more coats than I actually planned.

    Sounds really pretty.

  • 12 years ago

    We had the Swedish Finish applied many years ago to oak floors. Very happy with the look & durability. We recently had new floors installed & had to have a water bourne finish applied. I don't think the Swedish finish is even available in our area. Just found this article comparing Pallman & Swedish finishes. We had Bona Traffic but according to this article, Pallman is superior. Does your floor finisher regularly use the Swedish finish? I know it is more difficult to apply & requires expertise. Synteko also has an excellent reputation. Sounds like your guy uses good products.

    Here is a link that might be useful: Hardwood Floor Finishes

  • 12 years ago

    Cef- They are planning on a sealer and 2 coats.
    Romy- Thank you for the article. It put some of my fears to rest. The floor guy has done the Swedish finish for a long time and the Pallmann water borne for about 3 years. The water borne was a beautiful finish. If we do the water borne, it will be easier to deal with as for as fumes and I guess we could have it screened and re-coated in 5 to 10 years.
    Mostly I don't want a floor that does not hold up to kitchen use. I even thought about tearing out the wood and installing tile, but the living room and kitchen run together quite a bit.
    So, I am still thinking it over, but I am sure after reading Romy's article, one of these floor finishes will work.

  • 7 years ago

    I wanted a natural look for my white oak floors so went with the Pallman Clear for sealer and the Pallman Power in Satin as the finisher. I love how my floors turned out. The satin does have a slight sheen to it but I was afraid to go with the matte as we often go barefoot and I've read that often leaves footprints on matte floors (have also read that matte floors quickly go dull). It was the first time my finisher had used Pallman and he was very impressed with the product. He's planning on continuing to use the product.

  • 7 years ago

    Hi https://www.houzz.com/user/griesel are you still happy with your floors after having the Pallmann products applied to them. I’ve read about and am experiencing myself some Clear scuffing on floors with Pallmann ?!?? And my floors have just been finished. I’m a bit nervous about how they are going to be high maintenance